[50mhz] Fw: 6m repeater for sale

[Ray Brown]

  Okay, folks, listen up... *I* am not selling a repeater, Brian (listed below) is.
So, click on the address below to ask him questions, don't just hit the reply
button. Besides, I don't think Brian is on 50MHZ. Thanks!

                _Ray_        KBØSTN


----- Original Message ----- 
From: "WC4J" <wc4j at arrl.net>


> For sale 6m repeater minus duplexer antenna and 12v. Perfer local sale
> as will not ship but will deliver with in 100 miles of Washington DC
> 225.00 obo
>
> Brian WC4J
>
>
>
>           Description
>
>
>
> GE mastr II low band mobile radio, 100 watt version, E case. Has second
> receiver on the bottom for  DTMF control of repeater controller.
>
>
>
> Full duplex repeater conversions completed. Crystals or ICOMS removed,
> otherwise a turn key package. Has ICS basis repeater controller. High
> quality silver plated teflon N type antenna jacks used. Includes a copy
> of the BF-10A key for the lock on the chassis.
>
>
>
> Has NHRC volume and squelch board for control of primary (low band
> receiver) and has comparable home made volume and squelch controls for
> the auxillary receiver. There are also 2 GE tone boards or CTCSS or
> Guard Tone boards, dip switch setable tone selection. One for the low
> band 6 meter receiver, and one on the auxillary receiver.
>
>
>
> The ICS repeater controller is located in a RF tight cast aluminum
> enclosure on stand offs with a DB-9 connector to interface it to the
> repeater and auxillary receiver. RG-174 type audio coax is used throughout.
>
>
>
> This repeater was functioning fine when removed from service. The
> channel elements are not included with this repeater. The recieve
> sensitivity was good at 52.180 MHz. Likewise the transmitter was fully
> operational at 52.680 MHz.
>
>
>
> There is also included a mounting tray that is attached to a pair of 5
> 1/4 inch, 19 inch,  rack mount plates. Mounted to the plates is a
> speaker and junction box for the end of the included control cable.
>
>