[2m] VHF and UHF Antennas FS

[Ken, W8EK]

VHF/UHF Base Station Antennas For Sale:

440 MHz Beams, Six meter beam, 2 meter
Omnidirectional Verticals, and 440 MHz Omni
Vertical

In all cases, pickup near Ocala FL is preferred,
but some can be shipped.
.

.
Beam Antennas for the 432 MHz band:

I have a couple of M2 beam antennas for sale.
M2 antennas are usually considered to be one of
the best brands, well made.

One of the things that sets M2 antennas apart is
that the elements in these beams are insulated
from the boom. Apparently this gives the beams
better performance.

Both of these work fine, and look extremely
good. They have stainless steel hardware, so
corrosion is not a problem.
They can be mounted either horizontally
or vertically.

21 elements for 432 MHz, on a 14.5 foot boom.
Broken down into three approximate 5 foot long
sections, but with all elements assembled on boom.
$100

15 elements for 432 MHz on a 10.5 foot boom.
Broken down into two approximate 5 foot long
sections, but with all elements assembled on boom.
$85

.

Cushcraft A 50-3 Six Meter Ham Radio Beam:

The Cushcraft A 50-3 is a six meter, three element
beam on a six foot boom. It is very much a
"standard" six meter beam.

It is the time of year that six meters should be
opening up, so get this antenna to be ready.

This antenna is in good shape. Actually, it still
shines. Since it uses stainless steel hardware,
you do not need to worry about rust and
corrosion.

This one was made in New Hampshire.

Although this one includes paper work, it is also
marked for easy assembly.

Get this one for half the price of a new one.
Only $70.

.

Amateur (Ham) Radio 2 meter J Pole Antenna:

The J Pole 2 meter antenna offers some gain over a ground
plane or dipole type of antenna, and is fairly easy to mount.
It is a fairly broad band antenna, covering the entire 2 meter
amateur radio band. The antenna analyzer shows this one is
resonant at 146.7 MHz.

Although J pole antennas are made from various materials,
this one is made from copper pipe, so it is very rigid.

Only $30.  This one can NOT be shipped as it is
much too long.

.
Cushcraft Ringo Ranger Omnidirectional Vertical Antennas:

The Cushcraft Ringo Ranger Antennas have been the
standard of the industry for many years. They
provide omnidirectional gain on the order of 6 db,
and are rugged antennas.

Mechanically, they are made to go on a 1 1/4 inch
mast.

Both of these work well, and are in good shape
mechanically. They use stainless steel hardware,
so corrosion is not an issue.

They both have SO-239 connectors, ready for your
PL-259. Paper work included with both.

The first is for 2 meters. It is $55.

The second one is for 440 MHz, and is $45.

.
Hustler G6-144B, 2 m Vertical Antenna:

The Hustler G6-144B Vertical Antenna uses a 5/8 wave
lower and a phase matched 5/8 wave upper collinear
radiator that have been spaced for the optimum
lowest angle of radiation, giving 6 db gain over a
dipole, or 8.1 dbi.

G6-144B antennas are totally self-supporting,
about 10 feet high.

Hustler antennas are known for their quality
and robustness.

Specifications:
Vertical Antenna Height: 9.75 ft.
Antenna Material: Fiberglass/Aluminum
Antenna Power Rating: 600 W
Antenna Connector: UHF female, SO-239
Mast Mounting Type: Clamp-on
Mast Mounting Clamp: 1 to 1 3/4 in.
Antenna Wind Survival: 100 mph
Antenna Weight: 6.80 lbs.
Frequency Coverage Range: 143-149 MHz
Vertical Antenna Gain: 6.0 dBd

This one works like it should, and looks very nice.
Stainless steel hardware, so no corrosion problems.

With paper work for $85.
.

.

I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous
accessories, etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400



.



.