From ralph at mtservers.us Thu Dec 28 11:58:49 2017 From: ralph at mtservers.us (Ralph S. Turk) Date: Thu, 28 Dec 2017 09:58:49 -0700 Subject: [1000mp] Yaesu 1000mp Message-ID: <003301d37ffd$22611ec0$67235c40$@mtservers.us> Greetings I am trying to find the reset information for the Tuner memories. Some where there was a reset for only the Tuner but I have not been Able to find it. Hopefully someone on the list remembers what it is. Thanks Ralph, W7hsg --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From wd8arz at comcast.net Thu Dec 28 12:29:21 2017 From: wd8arz at comcast.net (WD8ARZ) Date: Thu, 28 Dec 2017 12:29:21 -0500 Subject: [1000mp] Yaesu 1000mp Reset Options 12/28/17 In-Reply-To: <003301d37ffd$22611ec0$67235c40$@mtservers.us> References: <003301d37ffd$22611ec0$67235c40$@mtservers.us> Message-ID: Ralph, maybe some of the reset options discussed in the past might be of use to you. Dont forget you can save all your memories and restore them after a reset. Apparently there is not a specific tuner memory reset. - 73 from Bill - WD8ARZ =========================================== -------- Forwarded Message -------- Subject: Re: [1000mp] reset question Date: Mon, 09 May 2011 17:36:38 +0200 From: Eric Lammel Reply-To: All about Yaesu 1000mp <1000mp at mailman.qth.net> To: All about Yaesu 1000mp <1000mp at mailman.qth.net> He Stu, may be try this! Reset all settings to default : 29(0) + POWER ON Reset all memories : SUB(CE) + ENT + POWER ON Global reset : SUB(CE) + 29(0) + ENT + POWER ON Good luck! - 73 de Eric, DG4FAD Stu Ritter schrieb: > Can't find it in the manual, so what is the reset procedure for > the FT-1000MP. > > I seem to have lost reception and show high SWR across all three > of my antennas. > > thanks, Stu N0LEF =========================================== On 12/28/2017 11:58 AM, Ralph S. Turk wrote: > Greetings > > I am trying to find the reset information for the Tuner memories. > > Some where there was a reset for only the Tuner but I have not been > > Able to find it. > > Hopefully someone on the list remembers what it is. > > Thanks - Ralph, W7hsg From wd8arz at comcast.net Thu Dec 28 12:43:26 2017 From: wd8arz at comcast.net (WD8ARZ) Date: Thu, 28 Dec 2017 12:43:26 -0500 Subject: [1000mp] Memory / tuner optimizing FT1000MP 12/28/17 In-Reply-To: <003301d37ffd$22611ec0$67235c40$@mtservers.us> References: <003301d37ffd$22611ec0$67235c40$@mtservers.us> Message-ID: <775c76ab-beda-6365-bdfc-620035b4be98@comcast.net> Here is another email from the past about the memory / tuner optimizing .... Bill / WD8ARZ ..... out ========================================================================= http://www.va3cr.net/1000mp/Tips/Material/Memories.htm How to Clear all the Tuner Memories and Optimize the FT1000MP Antenna Tuner Hit the tune button 39 times and your tuner memories are full. Think of these "tune button" settings as dots on the curve. The MP will fill in between the dots using a straight-line extrapolation method. When you are tuning around with the tuner on, you will sometimes see the little "wait" light come on. That's the tuner extrapolating. I cover 40 meters with 4, 80 with 7, 160 with 5, 10 with 5, the other bands with 3. the three points are low swr point, 2/3 of way from there to high end, and 2/3 of way from there to low end. The one in the middle might not need tuning per-say (it could be 1:1), but it tells the tuner where the swr curve reverses direction and to start extrapolating with the "dot" for the other end of the band. Joe K2XX How to clear all the memories: ?Press SUB and ENT together then POWER on the radio. (Manual Page 102) ?The will reset the tuner memories (and all other memories) but it will not reset the menu settings. Suggestions on Tuner Settings ?You do not have to run TUNE for the antenna tuner every time you change bands. It remembers tuner settings 39 times. It is suggested that you use TUNE only two times for each band -- once for the low end (CW) and once for the high end (SSB). The tuner does a good job of tracking between these two memorized settings. If you do this, you will never fill up the 39 tuner memories again. Earl, K6SE Scanning Memories - Tip by WD8ARZ ?There are many interesting features on the FT-1000MP, and many of them are explained well in the owners manual...... but not all of them. The situation I am about to describe will be found in new FT-1000MP's and those that have had the memory reset. ?On page 47 of the owners manual, Memory Features are explained. The chart shows the standard 100 memories, the Quick Memory Bank, and the scanning memories P1-P9. Page 51 covers the Scanning Features, and the bottom left of page 52 starts the interesting section, scanning between frequencies. ?I followed the instructions time after time and could not get it work..... in fact I could not even get the P1-P9 memory selections to even display or to pull up at all....so how could I put information into them? I was about to reset my entire rig and try again but I decided to read the manual again looking for something I had missed. ?Yes I did miss something, a Note on page 49 that affected what I was trying to do on page 52. The note says: "When checking memories, both vacant and filled memories are displayed. If you would like to skip over vacant memories, press the FAST button before memory checking." ?Well, I dont know about you, but my Fast button is normally activated for most of my tuning around on the bands. Never having used the P1-P9 memories before meant that they were vacant........thus they were not displaying when I was trying to select them with the Mem/Vfo Ch knob! When I turned off the Fast button option, yep, there were the empty P1-P9 memories and now I could program them and use them. Ugh, it should not have been this hard to figure that out.... hi hi ?Also note that the reason this did not jump out at me before is that I had tested a MP software program to copy my memory frequencies to a computer file and back again. That process took all the empty memory channels and put in a default of 7.000.00 in all empty locations. Thus the Fast button activation did not have any blank memories to mask.......other than the P1-P9 memories. This is one of the reasons why I think programs should have the option to leave empty memories truly blank if they are empty and not put in some default value. From k4akc at arrl.net Thu Dec 28 12:45:33 2017 From: k4akc at arrl.net (Tom K4AKC) Date: Thu, 28 Dec 2017 11:45:33 -0600 Subject: [1000mp] Yaesu 1000mp In-Reply-To: <003301d37ffd$22611ec0$67235c40$@mtservers.us> References: <003301d37ffd$22611ec0$67235c40$@mtservers.us> Message-ID: <428B7AC73AAF493AAE758E4FB622E72A@QRPHiker> Hi Ralph, I have a 1998 FT-1000MP. My manual sez: Press 29 and power up. This resets MENU SETTINGS. Press SUB and ENT and power up. Resets all memories (except MENU settings). Press SUB, 29, and ENT and power up. Master CPU reset. This is on page 102 of the manual. The manual sez on page 36 that the tuner has 39 memories. If there is a tuner only reset, I too would like to know about it. Tom K4AKC -----Original Message----- From: Ralph S. Turk Sent: Thursday, December 28, 2017 10:58 AM To: 1000mp at mailman.qth.net Cc: w7hsg at comcast.net Subject: [1000mp] Yaesu 1000mp Greetings I am trying to find the reset information for the Tuner memories. Some where there was a reset for only the Tuner but I have not been Able to find it. Hopefully someone on the list remembers what it is. Thanks Ralph, W7hsg --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ______________________________________________________________ 1000mp mailing list Home: http://mailman.qth.net/mailman/listinfo/1000mp Help: http://mailman.qth.net/mmfaq.htm Post: mailto:1000mp at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From w7hsg at comcast.net Thu Dec 28 13:49:04 2017 From: w7hsg at comcast.net (Ralph) Date: Thu, 28 Dec 2017 11:49:04 -0700 Subject: [1000mp] Yaesu 1000mp In-Reply-To: <428B7AC73AAF493AAE758E4FB622E72A@QRPHiker> References: <003301d37ffd$22611ec0$67235c40$@mtservers.us> <428B7AC73AAF493AAE758E4FB622E72A@QRPHiker> Message-ID: <005201d3800c$89359770$9ba0c650$@comcast.net> Hi Tom I read the same on page 102. I have my MP set for transmitting out of band for AirForce and Army Mars. What I don't want is To have to go thru that again. For some reason I had a lot of problems setting General Coverage set Up for both transmitting and receive. Ralph, W7HSG -----Original Message----- From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-bounces at mailman.qth.net] On Behalf Of Tom K4AKC Sent: Thursday, December 28, 2017 10:46 AM To: All about Yaesu 1000mp Subject: Re: [1000mp] Yaesu 1000mp Hi Ralph, I have a 1998 FT-1000MP. My manual sez: Press 29 and power up. This resets MENU SETTINGS. Press SUB and ENT and power up. Resets all memories (except MENU settings). Press SUB, 29, and ENT and power up. Master CPU reset. This is on page 102 of the manual. The manual sez on page 36 that the tuner has 39 memories. If there is a tuner only reset, I too would like to know about it. Tom K4AKC -----Original Message----- From: Ralph S. Turk Sent: Thursday, December 28, 2017 10:58 AM To: 1000mp at mailman.qth.net Cc: w7hsg at comcast.net Subject: [1000mp] Yaesu 1000mp Greetings I am trying to find the reset information for the Tuner memories. Some where there was a reset for only the Tuner but I have not been Able to find it. Hopefully someone on the list remembers what it is. Thanks Ralph, W7hsg --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ______________________________________________________________ 1000mp mailing list Home: http://mailman.qth.net/mailman/listinfo/1000mp Help: http://mailman.qth.net/mmfaq.htm Post: mailto:1000mp at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ 1000mp mailing list Home: http://mailman.qth.net/mailman/listinfo/1000mp Help: http://mailman.qth.net/mmfaq.htm Post: mailto:1000mp at mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html From wd8arz at comcast.net Thu Dec 28 13:51:27 2017 From: wd8arz at comcast.net (WD8ARZ) Date: Thu, 28 Dec 2017 13:51:27 -0500 Subject: [1000mp] HeathKit HS-1661 Use With Yaesu 1000MP 12/28/17 In-Reply-To: <003301d37ffd$22611ec0$67235c40$@mtservers.us> References: <003301d37ffd$22611ec0$67235c40$@mtservers.us> Message-ID: <2b446143-33ed-ed78-f14b-a6b8aacd63ef@comcast.net> Thoughts about a communications speaker for the FT1000MP .... from memory lane. Bill / WD8ARZ .... out for now .... -------- Forwarded Message -------- Subject: [FT-1000MP] Sp 8 speaker - HeathKit HS-1661 Date: Wed, 23 Mar 2016 17:30:02 -0400 From: WD8ARZ wd8arz at ix.netcom.com [FT-1000MP] Reply-To: FT-1000MP at yahoogroups.com To: FT-1000MP at yahoogroups.com Keep in mind that understanding speech is not about HiFi. Speech is about intelligibility, the understanding of voice communications, the capability to understand the words even if the voice is not recognized to a particular person. The speaker used with the hf radio is as important to understand speech as the rest of the features in an hf radio. HiFi speakers used for communications makes voice intelligibility more difficult for the ears / brain to sort. The wider range audio spectrum challenges your ears to sort / filter to the audio that contains the voice you want to make out - the speech that you want to understand. Intelligibility of speech lies more in the higher part of the voice spectrum than the lower. The trick to intelligibility when using narrower bandwidth is to shift the bandpass some to reduce the low frequency portion of the voice and enhance the higher (no this is not about the tone control). It is also why it is important that transmitted signals contain good high end performance with less low end. Other wise the lower frequency portion of the audio uses up more of the transmitted signal power and not only reduces the "intelligibility' transmission range, but leaves the higher end of the voice range less effective. Try copying a bassy station when marginal, and the same station with less bass and more highs in the voice. If you can find and acquire a HeathKit HS-1661 speaker, I highly suggest you do it. 300 - 3000 Hz is a great voice speaker with out all the 'hifi". My ham station uses two of these speakers, one on either side of me. The only improvement I have found left, is to use communication headphones with a similar frequency range ..... not hifi range. 73 from Bill - WD8ARZ From kc6mmi at yahoo.com Fri Dec 29 05:01:25 2017 From: kc6mmi at yahoo.com (Rich Wilson) Date: Fri, 29 Dec 2017 10:01:25 +0000 (UTC) Subject: [1000mp] Yaesu ft 1000 mp mark V Field for SALE References: <1014622678.5253634.1514541685311.ref@mail.yahoo.com> Message-ID: <1014622678.5253634.1514541685311@mail.yahoo.com> ?Morning.Happy New Year. i have the following ?Yaesu FT 1000 MP Mark V Field (NO box) with1 each of thefollowing filters:XF-114SN / XF-114CN / XF-110SN / XF-115C (no boxes &all need to be installed.)?1 copy of the owner?smanual & 117 V Power cord.1 Yaesu stock hand mic1 Yaesu MD-100 A8X Desk mic (in box)1 Yaesu MD-200 A8X Deluxe desk mic (in box)1 DVS-2 DIGITAL VOICE RECORDER (no box) 1 FH-1 REMOTE CONTROL KEYPAD (no box)1 SP-8 LOUDSPEAKER WITH AUDIO FILTERS & Hookup Cable (NoBox)1 inrad IF MOD KIT (70 MHz Preamp No box) will needinstalling?I Will NOT separatethe pieces. Radio is a virgin, no mods or updates. Radio works well and looksgood. I will have my Local UPS Store pack everything and ship to the buyer. IAm moving into an apartment and won?t be able to use this great system. Questionswelcome.Priced to sell $2,800.00 shipped & InsuredThanks for looking.Rich??? KC6MMIPHONE : 406-672-3529 From jimw3nrj at yahoo.com Fri Dec 29 11:45:02 2017 From: jimw3nrj at yahoo.com (Jim Locke) Date: Fri, 29 Dec 2017 16:45:02 +0000 (UTC) Subject: [1000mp] Pre eBay sale of FT 1000 MP with many INRAD filters References: <720102172.6089794.1514565902918.ref@mail.yahoo.com> Message-ID: <720102172.6089794.1514565902918@mail.yahoo.com> Everything working with built in power supply and over $600 worth of a full complement of INRAD IF filters 400Hz and above on the main RX and 500Hz on the secondary RX,? and including INRAD Roofing Filter. Original box, all original invoices, menu set-up "hints" sheets, manual, amp interface cable.? I will deliver (or meet half-way) up to 150 miles from Washington DC.? Built in power supply.? Just checked eBay closed sales. On eBay, I will look for a buyer offering $1295 plus shipping.? Without all the filters mine has, sellers are getting $1200 plus shipping of $60 or more.? (I think a double box shipping plus insurance would cost >$100.)? I am an "Above Standard"? hobbyist eBay seller of ham gear and antiques with a squeaky clean Paypal record.? Paypal or check OK (but has to clear and in my bank account before shipping). Going on eBay auction later this month (January 2018). Contact jimw3nrj at yahoo.com for more information or your offer.? 73, Jim