[1000mp] FT-1000MP failure...

[Bob Main]

Did you try http://www.va3cr.net/markv/index.htm he has some troubleshooting
on there.  He also has a service manual for the Mark V that you can
download.  Now not sure is this is the 200W version like I have or the
Field, but worth looking into.  Good luck.

73, Bob KB4CL

-----Original Message-----
From: 1000mp [mailto:1000mp-bounces at mailman.qth.net] On Behalf Of Jim Dawson
Sent: Monday, October 24, 2016 11:04 AM
To: 1000mp at mailman.qth.net
Subject: [1000mp] FT-1000MP failure...

I moved to a new QTH a year ago. When I moved my MP was working perfectly
but after sitting on the shelf for a year I plugged it in and turned it on.
It appears to power up but the display lights very faintly and does nothing
else. I hear a relay click and a faint pop through the speaker. The same
happens when I switch it off. I've tried it with both the internal AC supply
and an external supply.

I can't find any trouble shooting help anywhere, only the "Technical
Supplement", which only give alignment instructions. There doesn't appear to
be a real service manual available except for the Mark V.

Any suggestions?

Thanks,
Jim - K9DD
______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:1000mp at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html