[1000mp] AM power FT-1000MP

[rick.moskovits at ns.sympatico.ca]

Hi Al, a 100w ssb radio should be run max at 25watts  am----this is due to removal of carrier and other sub bands allowing 100w talk power in single side band-have fun!-73 Rick Ve1rnm 
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.

-----Original Message-----
From: "Al Manhan" <almanhan at verizon.net>
Sender: 1000mp-bounces at mailman.qth.net
Date: Thu, 20 Feb 2014 14:28:12 
To: <1000mp at mailman.qth.net>
Reply-To: All about Yaesu 1000mp <1000mp at mailman.qth.net>
Subject: [1000mp] AM power FT-1000MP

Just acquired a FT-1000MP and need a little clarification on AM and menus.

The manual says the RF power knob adjusts the output from 5-100 watts, 
except in
AM mode where it is about 5-25 watts. This would be the correct power to use 
in AM.
However I can crank it up to 100 watts.  Is this normal?

Also in setting the menus I assume that when the choice is finally made I 
press the ENT button
to lock in the setting.
But nowhere in the manual does it say that.

Tnx for any info,
Al
K2DYH


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:1000mp at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html