[1000mp] MP went dead

[N0OEL at aol.com]

Yaesu is an option.    However understand that in most cases  most parts 
are not available for that radio any longer.     However, the following 
service center is good at repair and often can find used  parts.     He not only 
does all my repair (I have two  Yaesu's but just sold another and have worked 
with this fellow for many  years.    He is first class!)
 
I would call Gary Grivna K0GX and talk to him about your problem and see if 
 he can help you.    
 
Electronix Servicing
763-561-2836
Brooklyn Center, Mn
 
-Mike 
K0BUD
 
 
In a message dated 10/23/2013 3:02:01 P.M. Central Daylight Time,  
w3fi at zoominternet.net writes:

My  faithful FT1000MP went dead below 7.500 MHz. Normal above that. I had  
planned to send it off to Byron, the guru, but he is on vacation until  
January.

Any ideas what might cause this? Right at 7.4999 a relay  clicks and 
reception goes out, no transmissions on lower bands.   Seems like a PLL 
problem I had some years ago. Any ideas what might cause  this. Maybe a 
tweaking needed or that relay?

Is Yaesu service an  option?
______________________________________________________________
1000mp  mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:1000mp at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html