[1000mp] VFO Reset To Bottom Of The Band

[Anthony (N2KI)]

Billy,

Indeed that is the case.  Changed the battery and that fixed the problem.
It's the original! It's been in there since 1999 so I guess it's about time.

Thanks.

73


Anthony - N2KI
 www.n2ki.com

-----Original Message-----
From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-bounces at mailman.qth.net]
On Behalf Of Billy Cox
Sent: Saturday, July 23, 2011 6:47 PM
To: All about Yaesu 1000mp
Subject: Re: [1000mp] VFO Reset To Bottom Of The Band

I believe you are on the right track, 
replaced the 2032 battery in one of
mine when I noticed the same and all
was well. Was perplexing at first ...

Hope this helps!

73 de Billy, AA4NU

-----Original Message-----
>From: "Anthony (N2KI)" <n2ki at hvc.rr.com>
>I have not seen this symptom before on an Ft1000MP(Original).
>
>All of my VFO's in each band always reset to the bottom of the band.  For
>example,  40 meters goes to 7.0000, 20 meters goes to 14.000 and so on.  If
>I tune the VFO, turn the radio off, and then back on it all goes back to
the
>bottom of each band.
>
>The memory banks however have still retained their programmed values. They
>do not seem to be affected.
>
>Any ideas?  Maybe the Lithium Battery?
>
>Thanks.
>
>Anthony - N2KI
>www.n2ki.com
______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:1000mp at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html