[1000mp] Mark V

[J. C. Mc Laughlin]

Dear Mike W2AJI:    Yes.    Not tried:  the receive port as it is desired to 
transmit and receive on the same antenna and a reasonable receive-only 
antenna does not (can not) exist.

Also tried:  FT1000 MkV was connected directly to the antenna.  The antenna 
is a 40 foot (approximately) vertical with radials within something like 100 
feet of a fresh-water lake.  With previous rig (the little Yaesu) a SG-230 
at the base of the antenna was used.

Thanks for your continuing assistance.  73,  Mac  N8TT

P.S.:  Who is cherokeehillfarm at earthlink.net  who wants one to register with 
him before he will respond?

J. McLaughlin;  Michigan, USA
Home:  JCM at power-net.net
----- Original Message ----- 
From: "Mike Schatzberg" <cherokeehillfarm at earthlink.net>
To: "J. C. Mc Laughlin" <jcm at power-net.net>; "All about Yaesu 1000mp" 
<1000mp at mailman.qth.net>
Sent: Monday, May 31, 2010 8:47 AM
Subject: RE: [1000mp] Mark V


If you change the antenna port from A to B do you still get the problem?

73,
Mike
W2AJI

-----Original Message-----
From: J. C. Mc Laughlin <jcm at power-net.net>
Sent: Monday, May 31, 2010 8:37 AM
To: Barry Mitchell <bmitch1 at optusnet.net.au>
Cc: 1000MP Dec2001 <1000mp at mailman.qth.net>
Subject: Re: [1000mp] Mark V

Dear Barry VK6WF:

    Thanks for the hint.  I will double check, but I think that each of
those settings (flat vs. tuned) were tried.  I use "tuned" on my FT1000 MkV