[1000mp] FT1000MP CW monitor

Thu Mar 11 01:49:37 EST 2010

Hi Ed,
this quote is right, but new software nowadays gives the chance of 
sound recording the contest so, in case of doubt callsign, to resolve 
playing back it. Clicking on the callsign you can hear the recordered 
sound, so hearring your own sidetone helps to understand what did 
happen. It's only my need.
Copy you in next contest.
Ciao
Sante

At 21.41 10/03/2010, you wrote:
>I copied this quote from anouther source
>
>You probably want to record not only the station you work but also your own
>audio/sidetone. 'Monitor on' is needed on most radios.
>
>I only want to record the station I'm working, so I
>haven't pondered this very much.
>
>later
>Ed
>KG4W
>
>
>
>----- Original Message -----
>From: "Tod -ID" <tod at k0to.us>
>To: "'All about Yaesu 1000mp'" <1000mp at mailman.qth.net>
>Sent: Wednesday, March 10, 2010 2:36 PM
>Subject: Re: [1000mp] FT1000MP CW monitor
>
>
> > Jim:
> >
> > When I key my FT1000MP it seems to silence the AF output from the AF-OUT
> > jack -- even when I have the Monitor function turned ON. I do hear the
> > monitor tone on my FT1000MP internal speaker. However, if I use headphones
> > there is no audio output from the internal speaker nor from the AF_OUT
> > jack.
> >
> > I believe this is the issue for Sante [and me] when we wish to record the
> > RX
> > signal and also out own TX signal during a contest. At this point the only
> > way I have found to do this type of recording and capture both signals is
> > to
> > parallel the connection to the headphones to get the audio which can be
> > fed
> > to the recording device.
> >
> > In a somewhat long post previously I suggested that there may be an easily
> > accessible internal jack that would make the monitor and RX audio signals
> > available. With what I would expect to be a simple circuit design it
> > should
> > be possible to have AGC control of the audio and send it out of the radio
> > in
> > a way that will not compromise the existing circuit paths.
> >
> > Tod, K0TO
> >
> >
> >> -----Original Message-----
> >> From: 1000mp-bounces at mailman.qth.net
> >> [mailto:1000mp-bounces at mailman.qth.net] On Behalf Of Jim Smith
> >> Sent: Wednesday, March 10, 2010 3:30 AM
> >> To: All about Yaesu 1000mp
> >> Subject: Re: [1000mp] FT1000MP CW monitor
> >>
> >> Hi Sante
> >>
> >> Perhaps I don't understand what you want or perhaps we're
> >> talking about different radios.
> >>
> >> This is what I think you want.
> >> Record audio of station you are listening to Record audio of
> >> what you transmitted to the station (Monitor output)
> >>
> >> Is this true?
> >>
> >> If so, these are both available at the AF Out jack at the
> >> back of the FT-1000MP Mk V
> >>
> >> I don't know if this is true for the 1000MP
> >>
> >> Is your radio FT-1000MP or FT-1000MP Mk V?
> >>
> >> 73, Jim VE7FO
> >>
> >>
> >> Sante - IK0HBN wrote:
> >> > Thank you Jim,
> >> > but taking audio from AF OUT on the back of MP does not resolve the
> >> > problem of listening my own manipulation when on TX. As I
> >> record and
> >> > save all the contest audio, at the end I ear the station's,
> >> audio, but
> >> > could not ear myself, as monitor audio does not go to AF
> >> OUT but only
> >> > at headphone socket in the front of radio.
> >> > Thanks again but I fear there are no shortcome to the
> >> problem, if not
> >> > modifying the hardware of the radio.
> >> > Ciao
> >> > Sante
> >> >
> >> >
> >> >
> >> > At 02.17 10/03/2010, you wrote:
> >> >> Sante
> >> >> I run the VFO A and VFO B audio from the back of my Mk V into
> >> >> channels 1 and 2 of a 4 channel mixer.  I route the L and
> >> R outputs
> >> >> of the mixer to, among other places, a headphone amp.  I hear the
> >> >> audio from VFO A in my left ear and the Monitor output in my right
> >> >> ear (Mk V MONI button "ON").  Both levels are independent of front
> >> >> panel control settings but each one is controlled by the
> >> sliders on
> >> >> the mixer.  To hear both outputs in both ears I flip the "MONO"
> >> >> switch on the mixer which parallels the L & R outputs of the mixer.
> >> >>
> >> >> I don't know anything about the Soundblaster but it seems
> >> to me you
> >> >> could accomplish the same with a couple of pots on the AF
> >> Out lines
> >> >> feeding a simple resistive combiner to get everything onto
> >> one channel.
> >> >>
> >> >> 73, Jim Smith   VE7FO
> >> >>
> >> >> Sante - IK0HBN wrote:
> >> >>> Hi all,
> >> >>> I need to have cw monitor sound on AF OUT socket to record with
> >> >>> Win-Test contesting activity. I could hear from AF OUT only the
> >> >>> received signals, but not my manipulation. When on
> >> trasmitting the
> >> >>> only recordered sound is the clicks of my keyer - probably due to
> >> >>> some RF pick up.
> >> >>> Any hint? I could use the phone socket in the front of
> >> radio to pick
> >> >>> up both RX and TX signals, but it's annoying to have
> >> volume of radio
> >> >>> locked always at same level so to avoid overriding sound
> >> blaster LINE-IN.
> >> >>> Any modification to the radio to get both signals?
> >> >>> TIA
> >> >>> Sante
> >> >>>
> >> >>> ______________________________________________________________
> >> >>> 1000mp mailing list
> >> >>> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> >> >>> Help: http://mailman.qth.net/mmfaq.htm
> >> >>> Post: mailto:1000mp at mailman.qth.net
> >> >>>
> >> >>> This list hosted by: http://www.qsl.net Please help support this
> >> >>> email list: http://www.qsl.net/donate.html
> >> >>>
> >> >>>
> >> >> ______________________________________________________________
> >> >> 1000mp mailing list
> >> >> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> >> >> Help: http://mailman.qth.net/mmfaq.htm
> >> >> Post: mailto:1000mp at mailman.qth.net
> >> >>
> >> >> This list hosted by: http://www.qsl.net Please help support this
> >> >> email list: http://www.qsl.net/donate.html
> >> >
> >> > ______________________________________________________________
> >> > 1000mp mailing list
> >> > Home: http://mailman.qth.net/mailman/listinfo/1000mp
> >> > Help: http://mailman.qth.net/mmfaq.htm
> >> > Post: mailto:1000mp at mailman.qth.net
> >> >
> >> > This list hosted by: http://www.qsl.net Please help support
> >> this email
> >> > list: http://www.qsl.net/donate.html
> >> >
> >> >
> >> ______________________________________________________________
> >> 1000mp mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:1000mp at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >
> > ______________________________________________________________
> > 1000mp mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/1000mp
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:1000mp at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
>
>______________________________________________________________
>1000mp mailing list
>Home: http://mailman.qth.net/mailman/listinfo/1000mp
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:1000mp at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html