[1000mp] FT1000MP CW monitor

[Jim Smith]

Sante
I run the VFO A and VFO B audio from the back of my Mk V into channels 1 
and 2 of a 4 channel mixer.  I route the L and R outputs of the mixer 
to, among other places, a headphone amp.  I hear the audio from VFO A in 
my left ear and the Monitor output in my right ear (Mk V MONI button 
"ON").  Both levels are independent of front panel control settings but 
each one is controlled by the sliders on the mixer.  To hear both 
outputs in both ears I flip the "MONO" switch on the mixer which 
parallels the L & R outputs of the mixer.

I don't know anything about the Soundblaster but it seems to me you 
could accomplish the same with a couple of pots on the AF Out lines 
feeding a simple resistive combiner to get everything onto one channel.

73, Jim Smith	VE7FO

Sante - IK0HBN wrote:
> Hi all,
> I need to have cw monitor sound on AF OUT socket to record with 
> Win-Test contesting activity. I could hear from AF OUT only the 
> received signals, but not my manipulation. When on trasmitting the 
> only recordered sound is the clicks of my keyer - probably due to 
> some RF pick up.
> Any hint? I could use the phone socket in the front of radio to pick 
> up both RX and TX signals, but it's annoying to have volume of radio 
> locked always at same level so to avoid overriding sound blaster LINE-IN.
> Any modification to the radio to get both signals?
> TIA
> Sante
> 
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:1000mp at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
>