[1000mp] Mark-5 Field problem

[Tom Homewood]

What are the conditions you have set up when you make the power 
measurements?

Have you checked with MMTTY as a stand alone program (as opposed to part of 
the N1MM setup) to see if you can get the proper output?

73, Tom, W1TO

----- Original Message ----- 
From: "Dick White" <whiter26 at sbcglobal.net>
To: "Post Mark-5" <1000mp at mailman.qth.net>
Sent: Friday, August 14, 2009 12:22 PM
Subject: [1000mp] Mark-5 Field problem


>I was setting up for the SARTG RTTY contest and found this problem with my
> YAESU Mark-5 Field.
>
> When I put it in TX I am only getting about 15 watts out with the RF Power
> in Lower SB mode or Upper SB mode. In the CW mode I am getting a full 100
> watts out. I have checked and rechecked all the buttons and they all seem 
> to
> be set properly. It was working ok yesterday morning, but not today.
>
> Any suggestions on what to do or look for ??
>
> Thanks and 73  Dick  KS0M
>
> Richard C. "Dick" White
> Fulton, MO. 65251  U.S.A.
> whiter26 at sbcglobal.net
>
> Live simply. Love generously. Care deeply.
> Speak kindly. Leave the rest to GOD.
>
> Amateur Radio Station - KS0M
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:1000mp at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html