[1000mp] dumb question on RX ANT OUT

[Tõnno Vähk]

Thanks, I checked the manual again and there is unfortunately no schematic and even no reference to RX ANT OUT jack at all it seems to me.

Can you or anyone tell what is the output of this jack then when RX ANT is selected and when say A ANT is selected if it depends on that. Is there anything else that this output depends on?

And how does this inline preamp thing work? Does it mean that I get main TX ANT signal from RX ANT OUT and route it through preamp to RX ANT IN??

73
Tonno


-----Original Message-----
From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-bounces at mailman.qth.net] On Behalf Of Billy Cox
Sent: Saturday, April 04, 2009 10:09 PM
To: All about Yaesu 1000mp
Subject: Re: [1000mp] dumb question on RX ANT OUT

The RX ANT OUT can be used to route the RX signal to
another receiver, or similar device like a transverter.

Used together <RX ANT OUT with RX ANT ON> provides an
easy way to add an inline preamp or a noise reduction
device like the MFJ-1026 without have to switch in it
and out of the MAIN TX line.

And YES, the RX ANT OUT is dependent on the antenna
choice. Check the schematic for more details as to
how the switching is accomplished.

Hope this helps!

73 de Billy, AA4NU

-----Original Message-----
>From: Tõnno Vähk <Tonno.Vahk at gildbankers.com>
>This is a silly question but after all the years I don't 
>understand what exactly the RX ANT OUT jack is used for. 
>Even manual does not help.
>
>What and when is the output from RX ANT OUT jack? 
>Does it depend on the antenna choice (A/B/RX)?
>
>73
>Tonno
>ES5TV
______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:1000mp at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html