[1000mp] FT-1000MP problems pse help- correction

[Alan P]

Armin, problem 1, if you transmit into a dummy load or an antenna with very
low SWR and your mode is on AM do you see any power output or "IC" current
indication?

-----Original Message-----
From: 1000mp-bounces at mailman.qth.net
[mailto:1000mp-bounces at mailman.qth.net]On Behalf Of zl1kmn at xtra.co.nz
Sent: Sunday, September 16, 2007 7:28 AM
To: 1000mp at mailman.qth.net
Subject: [1000mp] FT-1000MP problems pse help- correction


Hi,

I've just become an owner of a nice FT-1000MP.

Unfortuntely I have two problems:

1. When PROC activated, few milliwatts is the output, very little  I.C.
Does not react for PROC knob rotation. Seems, that PROC is always on
minimum. No problems when  the feature isn't used.
2. This one is very annoying:  When goes to transmit ( can be tested
easily with CW and pressing the mic) , there is a strong deep sound in
my headphones. It's like applying DC to the phone. Same sound can be
heard in internal loudspeaker as well. Have tested with two headphones,
same result. One was 300 Ohm , second one 36 ohms. Both have very good
response for deep tones, so its allmost impossible to hear your CW
transmit for a while..

One more idea:
Btw, MONI knob and button does not have any effect as well. If I speak,
I could hear some very distorsed deep sound, not readable at all.

No another problems, the rest of the transceiver works fine...

Have you experienced these problems?
Any idea, how to fix it?

Thanks,

Armin, ZL1KMN



______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net