[1000mp] Re: problem with Inrad IF mod

[Mike Schatzberg]

Hello George:

Assuming that you have the twelve volts and ground attached at the board,
you may have the input and output cables accidently reversed.

If your board shows 12 vdc and ground, and the input and output cables are
not reversed, you have a bad filter board.

73 and Happy DXing,

Mike
W2AJI
----- Original Message ----- 
From: "George Tower" <gtowerfl at comcast.net>
To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
Sent: Thursday, September 06, 2007 5:21 PM
Subject: Re: [1000mp] Re: problem with Inrad IF mod


> 1. Without IF mod radio seems to work fine.  Setting 9-1 at 14.
>
> 2. With IF Mod in, Audio is distorted at Setting 0 and increasing
>      slightly as you increase the Setting.
>
> 3.  Know one I have talk to has seen this problem before.  Radio two years
> old.
>
> George
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net