[1000mp] urgent help needed- reduced power on some bands

[ut5rp at te.net.ua]

Hi Armin!

Try Menu secure No. 9-2 and set each band's power in RTTY Mode!

73, Dima UT5RP

On Sat, 27 Oct 2007 05:50:53 +0200
  <zl1kmn at xtra.co.nz> wrote:
> As he contest started, I found out, that there is a problem with my
>FT1000MP.
> 
> I have 100w output on 1.8 and 3.5 MHz, but only 50w or less on 
>another
> bands. Tested with SSB and CW as well. The display shows 50w or less 
>as
> well.
> 
> It looks like this:
> 1.8 100w
> 3.5 100w
> 7	50w
> 10	40w
> 14	40w
> 18	25w
> 21	10w
> 24	25w
> 28	25w
> 
> In Menu 4-0 100w is shown. SWR is good ( tested with dummy load)
> 
> RF PWR is fully clockwise.
> 
> Any idea? . For me, looks like software problem. Have changed couple 
>of
> times to reduce the power on Menu 4-0, and then back to 100W, but no
> change.
> 
> Armin, ZL1KMN
> 
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net