[1000mp] FT1000MP Mark V RTTY

[Art Searle W2NRA]

Hi Bill,

In that rig you have 2 choices of tone sets at menu 6-2.  The mark freq of
the Hi-tones is 2125 Hz and the mark of the Low-tones is 1275 Hz.  This is a
difference of 850 Hz or a .85 kHz which is close to your measured .87 kHz.
To fix this set menu 6-2 to Hi-tones.  You want to do this anyway because
you can use your narrow filters if you choose the Hi-tones.  BTW I hope you
have the setting in menu 6-3 to oFFSEt  and not cArriEr.  This will get you
closer to cluster spots.


73 Art W2NRA
"Keep to the code"

-----Original Message-----
From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-bounces at mailman.qth.net]
On Behalf Of Bill -K3WI
Sent: Monday, February 05, 2007 10:23 PM
To: 1000mp at mailman.qth.net
Subject: [1000mp] FT1000MP Mark V RTTY

2 Icom 756 Pro Radios to be given away to QSL/QTH .NET supporters!  One on
Dec 31 and one on Jan 31.
See http://mailman.qth.net for details.
______________________________________________________________

New to this radio so pardon the question:

When using RTTY in FSK mode(lsb) and tx on freq e.g. 3580 those receiving me
see me on that freq but when they respond I see them as being .87khz lower.

I'm using MMTTY and microKeyer. 

Is this an offset that is programmed in the rig? 

Bill
K3WI