[1000mp] USB to serial adapter used for FT1000MP?

[ZL1KMN]

I had the same problem. 

Perfectly working USB to serial with Kenwood 930S, but does not work
with 1000MP.
I found that there is only one solution: using docking stations. They
have serial ports, and now its working FB for me.

Armin, ZL1KMN

-----Original Message-----
From: 1000mp-bounces at mailman.qth.net
[mailto:1000mp-bounces at mailman.qth.net] On Behalf Of Pete Smith
Sent: 2007. december 20. 13:21
To: KEN RAMIREZ, N4UK; All about Yaesu 1000mp
Subject: Re: [1000mp] USB to serial adapter used for FT1000MP?

Hi Ken - sorry to see the old call go.  Recently I was working with a
guy 
trying to get N1MM Logger going with a Mark 5, and he finally discovered

the problem was a defective Belkin adapter.  You might just try taking
the 
one you have back to the store and get another.  This does not seem to
be a 
very fussy application - the data rate is pretty low.

73, Pete N4ZR

At 08:18 PM 12/19/2007, you wrote:
>   I recently purchased a Belkin USB to serial adapter for CAT control
of 
> my MP. It will not work. I can get the CAT light to light up on the
rig 
> when trying to change frequency, etc but then I get a timeout from the

> computer and the rig does not do a thing nor does the computer grab 
> ffrequency, etc. from the rig.. All of the standard port settings have

> been set, verified, etc. What working USB to serial port converter is 
> being used by a majority of FT1000MP users???
>Thanks in advance.
>Ken,
>Now known as WØMZ and EX. N4UK
>
>______________________________________________________________
>1000mp mailing list
>Home: http://mailman.qth.net/mailman/listinfo/1000mp
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:1000mp at mailman.qth.net

______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net