[1000mp] menu 9.2

[Mike Schatzberg]

Hello MP Fans,

9.2 is not a critical setting but is particular to each individual radio and there is no default value.

Without instruments, tune both receivers to the same frequency, and use 9.2 to adjust the S meter reading on the main  
receiver to be the same as the second receiver.  More correctly, with the preamp on, use a signal generator, set for 50 microvolt output, and adjust 9.2 for S9 on the meter.

73 and Happy DXing,

Mike
W2AJI



-----Original Message-----
From: Anthony (N2KI) <n2ki at amsat.org>
Sent: Sunday, December 02, 2007 8:14 AM
To: 'All about Yaesu 1000mp' <1000mp at mailman.qth.net>
Subject: RE: [1000mp] menu 9.2

A factory reset should reset the menu settings back to default, I would
believe. No?  If not you can check my website www.n2ki.com/1000MP/1000MP.htm
and get a copy of my menu settings in PDF for an MP.  It may be very similar
to the Field.  Otherwise try www.va3cr.net .

 
Anthony - N2KI
 
 
-----Original Message-----
From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-bounces at mailman.qth.net]
On Behalf Of DL3HBY
Sent: Sunday, December 02, 2007 6:55 AM
To: 1000mp at mailman.qth.net
Subject: [1000mp] menu 9.2 

Hallo - i am looking for a correct information how to set the if-menu 
settings correct. i bought
a field an the old owner delivered it with `wild settings". i think in 
the manual is a fault or something missing.
looking forward for any helping info.

73 de dl3hby
______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net



______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net