[1000mp] CW USB/LSB frequency shift

[John Passaneau]

Hi Pete:
On my Mark V, there is a menu setting, (3.0) that changes the display from 
showing the carrier frequency which doesn't changing modes to one that show 
the BFO offset which does change with mode. Could this be your problem?

John Passaneau W3JXP
State College Pa.
w3jxp at arrl.net


----- Original Message ----- 
From: <W2pm at aol.com>
To: <1000mp at mailman.qth.net>
Sent: Saturday, September 30, 2006 8:47 PM
Subject: [1000mp] CW USB/LSB frequency shift


> When I switch from CW USB to CW LSB the frequency shifts with the offset
> value. Same when going CW LSB to USB.  The manual on page 35 specifically 
> says the
> rig automatically keeps the same frequency so you can shift from on 
> sideband
> to the other while in the CW mode for QRM reduction -- as most other rigs 
> do.
> But my rig does not do this and I can't switch sidebands without having to
> retune the tuning dial.
> Anyone know about this issue? It seems very unual a rig of this class 
> would
> have this problem and that the manual can be so wrong ..?? 73 Pete W2PM
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net