[1000mp] Inrad Yaesu Filters and Mic - PRICES REDUCED

[Michael Raskin]

Milt - Personal check from hams always ok.  $290 + $5 for priority mail. 
What address do you want them shipped to?

73,
Mike, W4UM (ex-K4KUZ)
South Florida DX Association - www.qsl.net/k4fk
Mid Florida DX Association - www.w4fdx.com
Florida Contest Group - www.floridacontestgroup.org

Michael M. Raskin
144 North Sewall's Point Road
Sewall's Point, FL 34996-6502
======================================
----- Original Message ----- 
From: "Milt, N5IA" <n5ia at zia-connection.com>
To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
Sent: Sunday, March 26, 2006 9:09 PM
Subject: Re: [1000mp] Inrad Yaesu Filters and Mic - PRICES REDUCED


> Mike,
>
> I will purchase all four filters.  Please advise address to where I can 
> send you a cashiers check.  Thanks.
>
> Milt, N5IA
>
> ----- Original Message ----- 
> From: "Michael Raskin" <rask1553 at bellsouth.net>
> To: "1000mp Reflector" <1000mp at mailman.qth.net>; "Yaesu Reflector" 
> <yaesu at mailman.qth.net>
> Sent: Sunday, March 26, 2006 6:15 PM
> Subject: [1000mp] Inrad Yaesu Filters and Mic - PRICES REDUCED
>
>
>>I have the following Inrad filters in original box for sale.  They will 
>>fit
>> in all FT-1000 series and most other Yaesu rigs.  Check out the
>> compatibility charts at www.qth.com/INRAD.
>>
>> 1) Inrad #715-C - 2800 kHz filter (455 kHz) for 3rd IF.  This is a 
>> plug-in
>> and replaces the OEM Yaesu SSB filter (2.55 kHz) for improved fidelity on
>> BOTH receive and transmit.  This filter is used when the bandwidth switch 
>> is
>> in "Nor" position.  This filter is one of the best investments you can 
>> make
>> for high quality sound reproduction and it plugs right in with no fuss.
>> $85.
>>
>> 2) Inrad #716-B - 2800 kHz filter (8.215 mHz) for 2nd IF.  This is not a
>> plug-in and must be soldered in, not a difficult job to do.  This 
>> replaces
>> the OEM Yaesu SSB filter (2.6 kHz) and, when used in conjunction with the
>> #715-C filter (listed above), results in dynamite sound quality.  $60.
>>
>> 3) Inrad #701-B - 400 Hz filter (8.215 kHz) for 2nd IF.  This is not a
>> plug-in and must be soldered in, not a difficult job to do.  This 
>> replaces
>> the OEM Yaesu CW filter (500 Hz) and, when used in conjunction with the
>> Inrad #703-C (400 Hz), results in the optimum selectivity in the "Nor"
>> bandwidth position.  $60.
>>
>> 4) Inrad # 719-C - 125 Hz filter (455 kHz) 3rd IF.  This is a plug-in, 
>> most
>> often used in option 5 slot which is quite useful, when used in 
>> conjunction
>> with the plug-in 250 Hz CW filter #708-B in option 2 slot, for serious 80
>> and 160 meter dxing as well as VHF moon bounce.  $85.
>>
>> I also have a Yaesu MD-100A8X Dynamic Mic with manual in original box. 
>> It
>> looks brand new as it has had very little use and has spent most of it's
>> life in the box in a closet.  $70.
>>
>> Mike, W4UM (ex-K4KUZ)
>> South Florida DX Association - www.qsl.net/k4fk
>> Mid Florida DX Association - www.w4fdx.com
>> Florida Contest Group - www.floridacontestgroup.org
>>
>>
>> ______________________________________________________________
>> 1000mp mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/1000mp
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:1000mp at mailman.qth.net
>>
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.385 / Virus Database: 268.3.1/292 - Release Date: 3/24/2006
>>
>>
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>