[1000mp] Inrad Yaesu Filters and Mic - PRICES REDUCED

[Michael Raskin]

I have the following Inrad filters in original box for sale.  They will fit
in all FT-1000 series and most other Yaesu rigs.  Check out the
compatibility charts at www.qth.com/INRAD.

1) Inrad #715-C - 2800 kHz filter (455 kHz) for 3rd IF.  This is a plug-in
and replaces the OEM Yaesu SSB filter (2.55 kHz) for improved fidelity on
BOTH receive and transmit.  This filter is used when the bandwidth switch is
in "Nor" position.  This filter is one of the best investments you can make
for high quality sound reproduction and it plugs right in with no fuss.
$85.

2) Inrad #716-B - 2800 kHz filter (8.215 mHz) for 2nd IF.  This is not a
plug-in and must be soldered in, not a difficult job to do.  This replaces
the OEM Yaesu SSB filter (2.6 kHz) and, when used in conjunction with the
#715-C filter (listed above), results in dynamite sound quality.  $60.

3) Inrad #701-B - 400 Hz filter (8.215 kHz) for 2nd IF.  This is not a
plug-in and must be soldered in, not a difficult job to do.  This replaces
the OEM Yaesu CW filter (500 Hz) and, when used in conjunction with the
Inrad #703-C (400 Hz), results in the optimum selectivity in the "Nor"
bandwidth position.  $60.

4) Inrad # 719-C - 125 Hz filter (455 kHz) 3rd IF.  This is a plug-in, most
often used in option 5 slot which is quite useful, when used in conjunction
with the plug-in 250 Hz CW filter #708-B in option 2 slot, for serious 80
and 160 meter dxing as well as VHF moon bounce.  $85.

I also have a Yaesu MD-100A8X Dynamic Mic with manual in original box.  It
looks brand new as it has had very little use and has spent most of it's
life in the box in a closet.  $70.

Mike, W4UM (ex-K4KUZ)
South Florida DX Association - www.qsl.net/k4fk
Mid Florida DX Association - www.w4fdx.com
Florida Contest Group - www.floridacontestgroup.org