[1000mp] 1000MP Problem

[Dave Meitzen]

I did all of that. Any other ideas? It is interesting that I have
microphonics and a scratchy sound (from the speaker) when I turn the main
knob. Trying to figure out how the audio and tuning knob are connected :>))
The AF and RF controls do not effect the sound.
FYI
Dave

-----Original Message-----
From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-bounces at mailman.qth.net]
On Behalf Of ChetMoore
Sent: Sunday, June 25, 2006 2:18 PM
To: All about Yaesu 1000mp
Subject: Re: [1000mp] 1000MP Problem

Start off by doing a CPU master reset  and go from there.  After a reset you
will have to go to the special menu and activate any filters that have been
added

chet
----- Original Message -----
From: "Dave Meitzen" <dmeitzen at comcast.net>
To: "'All about Yaesu 1000mp'" <1000mp at mailman.qth.net>
Sent: Saturday, June 24, 2006 5:03 PM
Subject: [1000mp] 1000MP Problem


>I recently bought a 1000mp and immediately installed the Inrad roofing
> filter and some filters (before I tested the radio - dumb) I power up the
> radio and the main frequency display displays 7285 and blinks of and on. 
> The
> audio is a slight hiss. I set the menu items without a problem. Remember
> this is my first MP so could it be a set up issue?
>
> Thanks for taking the time.
> Best Regards
> Dave
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
> 


______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net