[1000mp] INRAD 2.8 Filter

[Bob Martin]

depends what kind of communication you are using; rag-chewing, DX, 

contests, pile-ups, etc.

 

I did replace the standard Yaesu filters with two Inrad 2800 filters and 

IMHO it is a significant difference. Not only for the RX, but for the TX 

too! Your TX audio quality will improve with the 8.2 MHz 2800 Hz IF-filter.

 

In my Field I use these filters in combination with two 2100 Hz IF-filters.

 

You can install the two Yaesu 2400 Hz filters in the position of the two 

optional SSB-filters.

Then you will get this bandwidth: NOR = 6 kHz, NAR1 = 2.8 kHz, NAR2 = 

2.4 kHz.

This is particularly interesting for rag-chewing.

 

Hans I like your setup.  You mentioned two 2100 filter.  Are these filter
also installed in the other two optional slots?

 

Thanks,

Bob

 

Every Day Is Saturday, Except Sunday

 

 

 

 


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.0.371 / Virus Database: 267.14.13/221 - Release Date: 1/4/2006