[1000mp] While tuningup/down the band hearing blobs FT1000MP

[Peter Connors]

I also have the InRad roofing filter and with my IF gain anywhere 
between 13 and 10 (original and post-roofing settings) in menu 9-1 I can 
only hear a very brief drop in background noise at these frequencies 
while connected to a dummy load. It simply isn't any sort of an issue 
when connected to an antenna (unless I use a 50ohm resistor for an antenna!)

Pete, G4PLZ

PA5CA Frans wrote:
> Yessssssss, an other thing need to be considered... I have the Roofing filter installed.. so my IF gain has been slightly reduced and therefore I believe the click or blobs can be better noticed... due to the signal notice improvement.
> It is jus a suggestion but that may explains why one radio show it slightly more then a other.
> 
> Some of the QRG's that I found...:
> 28.508.16
> 24.903.68
> 21.053.44
> 21.217.27
> 18.104.32
> 14.336.00
> 14.008.32  and so on.....
> 
> 73
> Frans
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>