[1000mp] HELP NEEDED

[Stu.bsm]

Enter USER mode on Mark-V as follows:

Hold the PKT button for more than 1 second, then hold FAST+ENT
Rotate VRF/MEM CH knob to get to Menu 8-6 on display
Rotate SUB-VFO B knob to get EASY-SET on display
Rotate MAIN VFO-A knob to get PS31-U for USB, and PS31-L for LSB
Rotate SUB-VFO-B knob to get dsp-ofSt
Rotate MAIN VFO-A knob to bring frequency offset to 0.000 (Hz)
Hit ENT to exit

With the optional filters installed, make sure you have enabled them 
correctly using the various menus.  For PSK31, it is best to set menu 5-4 to 
8.2-455 (250Hz Filter Bandwidth).  This sets up the Mark-V to use the 250Hz 
filters for both the 8.2 and 455 IF.

The RF Output is also important for PSK31.  Do not overdrive the transmitter. 
 I setup my RF PWR knob fully clockwise (max. output) and during IDLE tone 
(on PSK31), limit my audio gain for about 70 watts or so on the Power Output 
Display.  Of course you should see NO ALC reading, because the RF Output is 
way below 200 watts.

**** YOU MUST press either the NOR, NAR1, or NAR2 buttons AFTER you change 
menu 5-4, in order for the changes to take effect. *****

Hope that helps

Stu MM0BSM

http://www.gmdx.org.uk/
http://www.gm6nx.com


----- Original Message ----- 
From: "Thomas Roesler" <troesler at terra.com.br>
To: <1000mp at mailman.qth.net>
Sent: Wednesday, April 26, 2006 10:03 PM
Subject: [1000mp] HELP NEEDED


Friends,

need some direction on the correct setup of the
Packet Mode  to use in PSK  and other digital modes.
I have the Yaesu MKV Field and also the FT 1000MP (
vintage)
Also what is the correct setting  for User Mode etc  ?.
The rig works  OK but I have to twist the shift/width
before i get a reasonable  waterfall view in Mixw  Hamscope 
etc.The manual is not very clear for me.
Thanks in advance for any help.
73,s
TOM PY2FR
______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net