[1000mp] FT1000MP MrkV s Meter Setting?

[W7RY]

I have found that the S-meter on my Plain MP is very low. I'm going to
adjust it later this week. 

I don't see a menu setting for what you describe below. But it's not a
MK V. According to the MP service manual, S-9 = 50 uV. Or -73 dBm.

73 Jim W7RY


-----Original Message-----
From: 1000mp-bounces at mailman.qth.net
[mailto:1000mp-bounces at mailman.qth.net] On Behalf Of Cliff Buttschardt
Sent: Monday, November 21, 2005 10:15 PM
To: All about Yaesu 1000mp
Subject: Re: [1000mp] FT1000MP MrkV s Meter Setting?

Rich Hallman - N7TR wrote:
> I found one of my three Mark 5's has a REAL generous s-meter.  I
checked two others and the main s meter is very close to the SUB...On
the one radio it is almost 15-20db more on the main than the Sub.  I
compared all three rigs and the one is consistently 15-20db more on the
main s meter.
> 
>  
> 
> Any thoughts on a fix for this, alignment?
> 
>  
> 
> Thanks...
> 
> Rich
> 
>  
> 
> *********************************************

Rich, there is a menu setting for this and probably
rather hard to find.  If you have trouble I'll try and
find it for you.  It allows selection of S9 = 10, 50
and 100 microvolts as I remember.    Cliff K7RR
______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net