[1000mp] Mark 5 and D104

[Steve Fraasch]

Buddy:

You will need either a hi-z to low-z transformer, or the D104 mic buffer (I still sell) that is featured in August 99 QST.  The mic plug wiring should be in the manual.

73,

Steve, K0SF

-----Original Message-----
From: "F.R. Ashley" <gdadx2 at earthlink.net>
Sent: Nov 15, 2005 4:29 PM
To: All about Yaesu 1000mp <1000mp at mailman.qth.net>
Subject: [1000mp] Mark 5 and D104

Hi all,

I have an old Astatic D-104 microphone that I'd like to wire to work with my Mark 5.    There are 4 wires, red, white, black and a shield.  Can someone give the correct wiring for the 8-pin Yaesu plug.
Also, I would like to hear from anyone who uses this mike with the Mark 5.  I've read the D-104 likes high Z but the manual says the Mark 5 is only 500-600 ohms.  

73, de wb4m
Buddy
______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net