[1000mp] Using CAT to Change Sub-RX mode

[Pete Smith]

Thanks, Brian -- Looking at the manual for the Mark 5, I was wondering if 
it would also work to Select VFOB (01H 05H), select mode (03H 0CH for CW) 
and then select VFOA again (01 OOH).  This analogous to what you do 
manually, isn't it?

73, Pete

8 AM 3/31/2005, Brian Smithson wrote:

>Hi Pete!
>
>What I end up doing is swapping A for B, setting whatever I need, and
>swapping back. This seems to 'map' the modes, filters, etc:
>
>0x5 0x1 to swap A/B - mainly to save A
>Set A accordingly
>0x5 0x1 to swap A/B back
>
>BTW to save tuner wear, I check and remember if the tuner is on, then I turn
>it off. After all this swapping I turn it back on if it was on. That seems
>to reduce the gyrations a bit.
>
>73!
>
>-Brian n8wrl
>
>-----Original Message-----
>From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-bounces at mailman.qth.net]
>On Behalf Of Pete Smith
>Sent: Wednesday, March 30, 2005 9:26 PM
>To: 1000mp at mailman.qth.net
>Subject: [1000mp] Using CAT to Change Sub-RX mode
>
>
>Is there a way to do this?  I can't find it in the manual. Badly needed
>here.
>
>Thanks,
>
>73, Pete N4ZR
>The World HF Contest Station Database
>was updated 16 March 2005
>2925 contest stations at
>www.pvrc.org/WCSD/WCSDsearch.htm
>
>______________________________________________________________
>1000mp mailing list
>Home: http://mailman.qth.net/mailman/listinfo/1000mp
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:1000mp at mailman.qth.net
>
>
>______________________________________________________________
>1000mp mailing list
>Home: http://mailman.qth.net/mailman/listinfo/1000mp
>Help: http://mailman.qth.net/mmfaq.html
>Post: mailto:1000mp at mailman.qth.net