[1000mp] ETO 91b and yaesu keying

[N3SL at aol.com]

Marc,
 
I have the 1000MP and 91B.  For about 6 years now I have used only the  band 
data jack on the MP, pins 2 and 3 (if you are using transistor  switching).  
The other end goes to the 91B, with RCA-plug, to RELAY.   I have never used KEY 
OUT, and I have never had "hot switch" problems.  I  run QSK up to 40 wpm.  
 
73,
Steve
 
In a message dated 3/27/2005 2:45:15 A.M. Central Standard Time,  
marc.wullaert3 at pandora.be writes:

Hi  ,
I'm a bit confused.I want to connect my Yaesu ft1000mp to my
ETO 91b  ampli via the banddata of the radio.
On the back of the 91b you have  RELAY  and KEY  OUT.
I want tho use the Key out also to not have  hot key switching while
using qsk.
My thaugt was to connect the Key out  to the TX INHIBIT off the
radio.On the alpha site they say to connect TX  INHIBIT to the ground
on the Relay jack.

I thaugt that the KEY  OUT  is for thelling the radio all is ok you can
transmit or
give  power out ? Wright

Could someone set a light on this ?

marc  on4ma








-- 
No virus found in this  outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus  Database: 266.8.3 - Release Date:  25/03/2005

______________________________________________________________
1000mp  mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help:  http://mailman.qth.net/mmfaq.html
Post:  mailto:1000mp at mailman.qth.net