[1000mp] MARK V DATA DIN 8????

[D. J.]

On 05, Mar 2005, at 10:05, John L Merrill wrote:

> Be careful of the 8 pin din plug. It's physically different than most 
> 8 pins
> out there.
>
> John N1JM
>


I've found The RF Connection web site to be very helpful.

http://users.erols.com/rfc/dinconn.htm

Dale





> -----Original Message-----
> From: 1000mp-bounces at mailman.qth.net
> [mailto:1000mp-bounces at mailman.qth.net]On Behalf Of Art Searle W2NRA
> Sent: Saturday, March 05, 2005 10:57 AM
> To: All about Yaesu 1000mp
> Subject: Re: [1000mp] MARK V DATA DIN 8????
>
>
> Hi Noel,
>
> I assume you know that DIN 8 is the Band data connector and it's 
> pin-out
> is as follows:
>
> 1=+13V
> 2=TX GND
> 3=GND
> 4=BAND DATA A
> 5=BAND DATA B
> 6=BAND DATA C
> 7=BAND DATA D
> 8=LINEAR
>
> I think you want DIN 4 for FSK:
>
> 1=SHIFT
> 2=RX OUT
> 3=PTT
> 4=GND
>
> And DIN 5 for AFSK
>
> 1=DATA IN
> 2=GND
> 3=PTT
> 4=DATA OUT
> 5=BUSY
>
> 73,
> Art
> W2NRA
>
> NOEL POULIN wrote:
>> Hello to everybody. I am a newcomer in this group.I am taking a look
>> at the DIN 8 DATA  socket from the MARK V. I see that Yaesu doen't
>> follow the normal order for the pinpout ..... Instead of having  in
>> order 1 2 3 4 5 6 7 8(center) ......................they have...7 1 4
>> 2 3 8 6(center)
>>
>> Is there anybody who already wired this DIN8 for rtty ????? Thanks
>> NOEL ______________________________________________________________
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net