[1000mp] PSK

[Stu]

Hi Roland

have you checked the mic settings rf power settings?
if you have then maybe the driver in the pa has went weak
A lot of people are saying that the class A is too hard on the pa when also turned down as well

I run my mkv set at full 200w then turn the pc down so power is running at 20-50w 
I just replaced my pa due to high swr and my own fault and its a real awkward thing to get into.

Maybe a call to yaesu and ask them for an opinion on what it maybe

Stu MM0BSM 
----- Original Message ----- 
From: "Roland Hundley" <hundley1 at adelphia.net>
To: <1000mp at mailman.qth.net>
Sent: Tuesday, March 01, 2005 4:03 AM
Subject: [1000mp] PSK


>       I  have a FT1000MP Mark V, 200 watt model...And  while I was running
> psk
>  at around 20 to 25 watts , in the class A operation, I look up at my
> output
> on meter...and  I was down to about 10 watts, and that is all I get now, no
> matter what I am in AM, FM SSB,, there was no nosie, or smell so nothing
> burn up..
> 
> Has anyone had this problem,can't understand at running 20 watts psk could
> have burn up something..At my age I have a hard time working on anything any
> more, so any help would be appreciated...
> 
> Thanks
> 
> Roland     N2BIJ
> 
> 
> 
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 2/25/2005
> 
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>