[1000mp] MK-V RTTY Filter Selection

[John Passaneau]

--
John Passaneau, W3JXP
State Collge, Pa.
 
---- "Joe Subich wrote: 
> 
> 
> > It is possible, I've done it in the limited case that I use 
> > sound card based RTTY software. I wanted to use the packet 
> > jack for the sound card hookup. I also wanted to use all my 
> > filters in PSK31 and RTTY. 
> 
> I already use the packet jack for my sound card connection.  I 
> use PKT (LSB) mode for AFSK and RTTY for FSK.  There is no need 
> to mess with the uSEr-Set to do that.  
> 
> > What I did which was go to the uSEr-Set (menu 8-6) and set 
> > mode, display offset etc to mimic upper sideband in the packet 
> > mode. In this mode you can select all filters and the packet 
> > jack audio input is activated. 
> 
> All you have accomplished if to create a USB equivalent of the 
> PKT mode.  Your filter selections (assuming you have all of the 
> Yaesu filters installed) are 2.4 KHz (Nor), 2.0 KHz (Nar1) and 
> either 500 Hz or 250 Hz (Nar2).  
> 
> The original question was how to configure the MK-V (and Field) 
> to allow selecting 2.0 (Nor), 500 (Nar1) and 350 (Nar2) in the 
> digital modes (PKT/RTTY).  The original MP allowed selecting 
> 6 KHz, 2.4 KHz, 2.0 KHz, 500 Hz, and 250 Hz in any mode. 
> 
> 73, 
> 
>    ... Joe, K4IK 
>  
> 
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp

That is what I did, but I can use all the filters I have in my rig, 2.4, 2.0 and 500KHz but not the 6.9KHz AM filter in the packet mode.  I said it was limited fix. As I use sound card generated AFSK RTTY and PSK31 with TrueTTy it works for me.

John W3JXP