[1000mp] MK-V RTTY Filter Selection

[Jay Bromley]

Hi Jim,
The only way I have found to do this and it is not as good as hitting the
narrow buttons on the front panel.  Go into menu 5-4 and select 500H.  But
to go back to the narrower filters your have to change it back to 8.2/455.
Both are on the "Nar2" position.  After changing the menu setting you have
to switch to " Wide" to reset the Nar2 to the new value.

I too hope someone would come up with a better way!

Nice to work you several times last weekend!!

73 de jay..
----- Original Message ----- 
From: "Jim W7RY" <w7ry at centurytel.net>
To: <1000mp at mailman.qth.net>
Sent: Sunday, January 16, 2005 5:59 PM
Subject: [1000mp] MK-V RTTY Filter Selection


> Has anyone on the list figured a way to select between the 500Hz (both
> IF's) and the 250Hz (both IF's) while in RTTY mode? It can be done while
in
> CW but I would like this
> capability in RTTY as well.
>
> I'm looking at the chart on the bottom of page 46 and that shows that Its
> not possible.
>
> I sure would like to be able to do it. My guess is that it's selected
> though software and the uP.
>
> Any ideas?
>
> Thanks and 73
> Jim W7RY
>
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp