[1000mp] EDSP vs IF filters

[Mark Shaum]

You can, but you will find the AGC captured by signals that are nearby
but outside of the audible bandpass.  The 250 hz filter pairs are hard
to beat for cw, rtty and (some) digital modes when there is much QRM or
when sigs are near the noise. Narrowing of the noise bandwidth
"upstream" helps the overall S/N ratio better than any of the provided
digital noise reduction algorithms do, IMHO.

Mark K9TR

----- Original Message -----
From: "Bob Main" <bobmain1 at alltel.net>
> OK, if it isn't strickly audio and it sure seems that I could use EDSP
in
> place of the 250Hz filters in the 2nd and 3rd IF.
>