[1000mp] using mark v on am

[Pete Smith]

This is a standard issue, and not just on AM.  Mine is particularly bad on 
15 SSB, and doesn't start until I have been transmitting for a while.  I 
surmise that something is getting hot and failing.  The transmitted audio 
is OK.

73, Pete N4ZR

At 06:53 PM 1/3/2005, you wrote:

>I have tried it on AM though I am using a Heil Goldline Pro and I get the 
>worst distorted signal when I have the monitor on as if there is some RF 
>getting into the MIC or something.
>
>Any thoughts on this trouble?
>
>
>
>----- Original Message ----- From: "Mike MacDonald" <mikemacd at erols.com>
>To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
>Sent: Monday, January 03, 2005 6:39 PM
>Subject: RE: [1000mp] using mark v on am
>
>
>>I've used mine a few times on AM. 15 or 20 W carrier, mic gain at 9 o'clock
>>using a Shure 444D. Have gotten some nice reports. Dial in some hold on the
>>radio's meter and you will see peaks of 100W.
>>
>>Mike WA2E
>>
>>-----Original Message-----
>>From: 1000mp-bounces at mailman.qth.net
>>[mailto:1000mp-bounces at mailman.qth.net]On Behalf Of n3drk
>>Sent: Monday, January 03, 2005 2:31 PM
>>To: 1000mp at mailman.qth.net
>>Subject: [1000mp] using mark v on am
>>
>>
>>Anyone using the mark v on AM? Like to hear reports people who have used it
>>on this mode.
>>john
>>
>>_______________________________________________
>>1000mp mailing list
>>1000mp at mailman.qth.net
>>http://mailman.qth.net/mailman/listinfo/1000mp
>>
>>_______________________________________________
>>1000mp mailing list
>>1000mp at mailman.qth.net
>>http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>_______________________________________________
>1000mp mailing list
>1000mp at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/1000mp