[1000mp] mkv died

[Stu]

Hi Wanda & George

its not the tuner wasn't using it at all 
Thanks anyway for the input

Stu MM0BSM

> Hi Stu,
> That is what we did in the same situation (a part of  documentation) in our
> FT1000MP:
> 
> "lt's because you exceeded the 39 memory channels, allocated to the antenna
> tuner.
> Press SUB/CE and ENT together while powering up. The will reset the
> tuner memories (and all other memories). It will not reset the menu
> settings.
> You do not have to run TUNE for the antenna tuner every time you change
> bands.
> It remembers tuner settings 39 times. "
> 
> Regards, yl Wanda and George SP7IWA/SP7TF
> 
> ----- Original Message ----- 
> From: "Stu" <samalex at eidosnet.co.uk>
> To: <1000mp at mailman.qth.net>
> Sent: Friday, February 18, 2005 5:20 PM
> Subject: [1000mp] mkv died
> 
> 
>> Hi folks
>>
>>  looking for ideas as to what my problem could be
>>
>> My 80m vertical showed high swr so I went out adjusted my antenna and then
> came back in checked swr and
>> was still high checked on 40m was ok so checked 80m again was a little
> high so I spun the vfo and found
>> where it was best was 1.7 then radio shut down. now radio wont switch on
> and the fp29 supply looks like
>> its straining when I try to switch radio on
>>
>> FP29 has correct voltage coming out of it will check under load later
>>
>> Any ideas before I send it away for a few weeks holidays
>>
>> Stu MM0BSM
>>
>> ______________________________________________________________
>> 1000mp mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/1000mp
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:1000mp at mailman.qth.net
> 
> 
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>