[1000mp] mkv died

[wanda_jj]

Hi Stu,
That is what we did in the same situation (a part of  documentation) in our
FT1000MP:

"lt's because you exceeded the 39 memory channels, allocated to the antenna
tuner.
Press SUB/CE and ENT together while powering up. The will reset the
tuner memories (and all other memories). It will not reset the menu
settings.
You do not have to run TUNE for the antenna tuner every time you change
bands.
It remembers tuner settings 39 times. "

Regards, yl Wanda and George SP7IWA/SP7TF

----- Original Message ----- 
From: "Stu" <samalex at eidosnet.co.uk>
To: <1000mp at mailman.qth.net>
Sent: Friday, February 18, 2005 5:20 PM
Subject: [1000mp] mkv died


> Hi folks
>
>  looking for ideas as to what my problem could be
>
> My 80m vertical showed high swr so I went out adjusted my antenna and then
came back in checked swr and
> was still high checked on 40m was ok so checked 80m again was a little
high so I spun the vfo and found
> where it was best was 1.7 then radio shut down. now radio wont switch on
and the fp29 supply looks like
> its straining when I try to switch radio on
>
> FP29 has correct voltage coming out of it will check under load later
>
> Any ideas before I send it away for a few weeks holidays
>
> Stu MM0BSM
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net