[1000mp] 12volt tap question

[Graeme. G4CKH]

Hi,   put it on a 12 supply and measure the current ????

Graeme.
----- Original Message -----
From: "FireBrick" <w9ol at billnjudy.com>
To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
Sent: Thursday, February 10, 2005 2:29 PM
Subject: Re: [1000mp] 12volt tap question


> Yes, this is a K9AY unit.
> http://www.aytechnologies.com/
>
>
> ----- Original Message -----
> From: "George & Marijke Guerin" <gmguerin at voyager.net>
> To: <n4gi at tampabay.rr.com>; "All about Yaesu 1000mp"
<1000mp at mailman.qth.net>
> Sent: Thursday, February 10, 2005 8:17 AM
> Subject: Re: [1000mp] 12volt tap question
>
>
> > KD9SV's Front End Saver only takes a few milliamperes, so you are plenty
> > safe powering it from the internal 12 volt jack.  It that what you
meant?,
> > or does K9AY also make a "FES"?
> >
> > George    K8GG
> >
> > ....snip....
> >> From: FireBrick <w9ol at billnjudy.com>
> >> Date: Thursday, February 10, 2005 9:04 am
> >> Subject: [1000mp] 12volt tap question
> >>
> >>> I just purchased a K9AY Front End Saver to use with my receiving
> >>> antenna and the Yaesu
> >>> FT1000MP.
> >>> It requires 12 volts for the relays.
> >>> The docs. don't say how much current it draws.
> >>> But..it shouldn't be that much.
> >>> So my question is:
> >>> Can the 12 volt jack which the manual says can handle 200ma,
> >>> handle a Front End Saver?
> >>> Because I can make a very neat and short wiring job instead of a
> >>> wall wart and it's cord.
> >>>
> >>> Please and thank you.
> >>>
> >>>
> > ...snip...
> >
> >>> Bill H. in Chicagoland
> >>>
> >>>
> >
> >
> > ______________________________________________________________
> > 1000mp mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/1000mp
> > Help: http://mailman.qth.net/mmfaq.html
> > Post: mailto:1000mp at mailman.qth.net
> >
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net