[1000mp] Menu 8-6 PKT-USB

[Ron Walters]

Well I see a problem after reading my own email, the Correct RX-CAR for 
the Low tones below should read  "453.745" if I am correct ?  Comments pse

Ron Walters wrote:

> Some Background
>
> FT1000MP (Vintage-old) Only runs on PKT LSB without some 8-6 settings
>
> Have some digital software that only runs USB, want to take advantage 
> of Digital input plug on the back.
>
> Reviewed the MARS modification for older rigs that changes menu 8-6 
> for PSK USB High tomes 2125Hz
>
> Want to use PKT-USB low tones 1070Hz
>
> Reviewing the MARS mod - As detailed on the VA3 FT1000MP site
>
> Menu 8-6
>
> Mode =   PKT-LSB
> DSP offset     =  +2.125
> RX-PLC  =  +2.210
> RX-CAR =  452.790
> TX-PLL =  +2.210
> TX-CAR =  452.790 *** Can use 456.300 for pre-lot #05 which is my rig 
> (Can not set lower)
>
> Hit "ENT" and it correctly stores, check user and can hear USB signals OK
>
> NOW to set it to low tones I want to use 8-6 as follows and would 
> appreciate a sanity check from someone else, they are:
>
> Mode =   PKT-LSB
> DSP offset     =  +1.070
> RX-PLC  =  +1.255
> RX-CAR =  453.930
> TX-PLL =  +1.255
> TX-CAR =  453.930 *** Can use 456.300 for pre-lot #05 which is my rig 
> (Can not set lower)
>
> Hit "ENT" and it correctly stores, check user and can hear USB signals OK
>
> I have called a few CQ's on PSK on 20 meters but so far no takers, I 
> am going to try it again tonight (8-2-05 GMT) and see what happens, 
> however, anyone see any problems?  Appreciate feedback, thanks in 
> advance for your thoughts
>
> 73's - Ron W4LDE
>
>
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>