[1000mp] Mark V Push to Talk RF Spike
Jaakko Silanto
jaakko.silanto at parnet.fi
Thu Apr 14 01:19:07 EDT 2005
Try these
Menu 7-7 (fast + ENT )
dSP-ndn
Sub VFO to SSB-t, and main VFO 200-3100
This helps my problem
de OH1MA
> -----Original Message-----
> From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-
> bounces at mailman.qth.net] On Behalf Of Mike Schatzberg
> Sent: 14. huhtikuuta 2005 6:18
> To: 1000mp at Mailman. Qth. Net
> Subject: [1000mp] Mark V Push to Talk RF Spike
>
> Hello Yaesu Fans:
>
> I have found that when operating PTT, that my Mark V spikes RF each time I
> key the microphone. It does this with each microphone I have tried. It
> appears that the spike is caused by noise input to the microphone preamp
> as the microphone cartridge is always in the circuit, so as to be able to
> be used for VOX operation. With the microphone gain turned full CCW,
> there is no spike during PTT.
>
> I normally use VOX, so this is not always an issue, but I would like to
> find a possible solution to the problem. The spike is greatly amplified
> by my linear, and needs to be eliminated.
>
> Has anyone experienced this issue?
>
> Thanks for your input.
>
> 73 and Happy DXing,
>
> Mike Schatzberg
> WB2AJI
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
More information about the 1000mp
mailing list