[1000mp] Modes on a Mark V

[Bob Main]

DXBase 2005 is the logging program.

----- Original Message ----- 
From: "Deon Erwin" <zs1zl at qsl.net>
To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
Sent: Sunday, October 17, 2004 7:05 PM
Subject: Re: [1000mp] Modes on a Mark V


> Bob
>
> The situation you experienced is due to the functionality of your logging
> program and not due to the radio.  Your logging program is set to
> automatically change the mode on your radio according to the US band plan.
> You can prevent it from occurring again by changing the auto-mode settings
> on your logging program to suit your operating habits.
>
> Or, you can follow John's advice if you do not wish to change the setup of
> your logging program.  I suggest you press the SUB button and not pinch 
> it.
> Pinching may upset the radio.
>
> Which logging program are you using?
>
> Deon ZS1ZL
>
> ----- Original Message -----
> From: "John L Merrill" <jmerrill1 at adelphia.net>
> To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
> Sent: Saturday, October 16, 2004 2:06 PM
> Subject: RE: [1000mp] Modes on a Mark V
>
> Bob:
> There is button on the keypad that says SUB. Pinch that button and then 
> the
> mode.
>
> John N1JM
>
> -----Original Message-----
> From: 1000mp-bounces at mailman.qth.net
> [mailto:1000mp-bounces at mailman.qth.net]On Behalf Of Bob Main
> Sent: Saturday, October 16, 2004 7:48 AM
> To: MarkV
> Subject: [1000mp] Modes on a Mark V
>
> Well I just ran into something interesting so thought I would ask you.
> VK6LA was operating on 40 mtrs.  He was transmitting on 7.069 phone and
> listening 7.200.  My logging program switch the radio to the proper
> frequency on both VFOs, but because 7.069 is CW for the US it set the mode
> of both VFOs to CW.  I changed VFO-A to LSB and tuned back, but then
> realized that VFO-B was still CW and I couldn't figure out how to change 
> the
> mode.  I remember reading it somewhere and finally got around it by press
> the A>B button to make VFO-B 7.069 on LSB and then walked it up.
> Unfortunately by the time I did this he had left.
>
> So I have two questions, 1) What is the easy way to change the mode on 
> VFO-B
> and 2) is there a menu item that would have caused VFO-B to automatically
> set up at LSB since that is what we use in the US?  Sure as heck don't 
> want
> to go through that again.
>
> 73s
> Bob
> KB4CL
>
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp
>