[1000mp] mk 5 TX GND fried??

[Marc Wullaert]

Paul,

You can also use the banddata tx to operate  a linear !
you need a buffer for this ..look at va3cr webpage .

probely the transistor driving the relay is bad...a friend off mine
had the same problem !
marc on4ma
----- Original Message ----- 
From: "Paul Ash" <bluesdude at cfl.rr.com>
To: <1000mp at mailman.qth.net>
Sent: Saturday, October 16, 2004 4:34 AM
Subject: [1000mp] mk 5 TX GND fried??


Hello All,

For the last few months I have not been running a linear
with my 1000mp mk5. I tried to hook up my Henry 3K this
evening and it looks like my TX GND connection is no longer
switching (verified with a DMM), I double checked the LIN switch,
it is in the correct position. Sounds like I have a fried relay or relay
switching circuit. Any suggestions? Last time I used the circuit it was
working fine. I would hate to give up my mk5 right before contest season,
do I have any other safe options to get a switched gnd on TX?

Thanks!

73,

Paul W4QG
_______________________________________________
1000mp mailing list
1000mp at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/1000mp