[1000mp] Is QSK with the MP or the MarkV possible?

[k2qmf at juno.com]

Boy,  how true that statement is,

If you find any help for this problem please post
it on the reflector...

Thanks and 73,  Ted  K2QMF

On Wed, 10 Nov 2004 20:31:41 -0500 "Gary Ferdinand W2CS"
<w2cs at bellsouth.net> writes:
> Welcome to the so-called QSK of the MP.  If you find a solution, I'm 
> all
> ears.  What you describe is what I hear, too.  It doesn't come even 
> close to
> the Kenwood TS930/40/50 series QSK.
> 
> Gary W2CS
> 
> 
> 
> > -----Original Message-----
> > From: 1000mp-bounces at mailman.qth.net
> > [mailto:1000mp-bounces at mailman.qth.net]On Behalf Of Tod - ID
> > Sent: Wednesday, November 10, 2004 6:38 PM
> > To: 'All about Yaesu 1000mp'
> > Subject: RE: [1000mp] Is QSK with the MP or the MarkV possible?
> >
> >
> > What 7-4 and 7-5 settings will do the job?
> >
> > I find that there is 'distracting' thumping when the RX comes
> > back on line.
> > The thump does not occur on the make.
> >
> > I sort of thought that the problem was the time difference in 
> millisecond
> > between the  drop of the RF output and the turn on of the RX. On 
> the other
> > hand it may be that the gain rise time is too fast. Maybe the AGC 
> has too
> > fast a rise time.
> >
> > Has anyone done any research on this? Am I the only one noticing
> > this? If so
> > I would like to know the settings other folks are using to be
> > sure if is not
> > a menu selection problem on my part.
> >
> > The thump is not dependent on running high power -- in fact, with 
> only 5
> > watts output (or less) the thumps is still there which leads me to 
> believe
> > it is an AGC matter.
> >
> > Tod, KØTO
> >
> >
> >
> >
> >
> >
> > >-----Original Message-----
> > >From: 1000mp-bounces at mailman.qth.net
> > >[mailto:1000mp-bounces at mailman.qth.net] On Behalf Of GRAEME 
> JACKSON
> > >Sent: Wednesday, November 10, 2004 10:55 AM
> > >To: All about Yaesu 1000mp
> > >Subject: Re: [1000mp] Is QSK with Mark Field possible ?
> > >
> > >You should not have any problems.
> > >Is your vox button pressed in by mistake ?
> > >Are menu selections 7-4 and 7-5 set correctly ?
> > >
> > >Graeme......G4CKH.
> > >----- Original Message -----
> > >From: "F8DQL" <f8dql at radioamateur.org>
> > >To: <1000mp at mailman.qth.net>
> > >Sent: Wednesday, November 10, 2004 3:45 PM
> > >Subject: [1000mp] Is QSK with Mark Field possible ?
> > >
> > >
> > >> Hello,
> > >> I recently bought a FT-1000MP Mark V Field and I am
> > >disapointed by the
> > >> AGC response time.
> > >> The receiver recovery time is too long, it is impossible to 
> receive
> > >> between my signals when operating QSK at 20 wpm or more.
> > >> Is there a way to correct that ?
> > >> I noticed that the receiver recovery time was a bit better
> > >with the AGC
> > >> slow mode, but not really convincing.
> > >> Thanks for your help.
> > >>
> > >> _______________________________________________
> > >> 1000mp mailing list
> > >> 1000mp at mailman.qth.net
> > >> http://mailman.qth.net/mailman/listinfo/1000mp
> > >
> > >_______________________________________________
> > >1000mp mailing list
> > >1000mp at mailman.qth.net
> > >http://mailman.qth.net/mailman/listinfo/1000mp
> > >
> >
> > _______________________________________________
> > 1000mp mailing list
> > 1000mp at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/1000mp
> 
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp
> 
> 

________________________________________________________________
Juno Platinum $9.95. Juno SpeedBand $14.95.
Sign up for Juno Today at http://www.juno.com!
Look for special offers at Best Buy stores.