[1000mp] 1.8 KHz filters in CW position

[Earl W Cunningham]

Jeff, K3DUA wrote:

"Is it possible in the FT-1000MP to use the 2.0 filters (in both 8.2 and
455 IF's) in the normal 2.0 KHz positions, AND to put 1.8 KHz filters
(again in both IF's) in the 250 Hz slots and to program the radio to 
give the option of 2.0 or 1.8 filters while in SSB?"
==========
I have 500 Hz and 250 Hz CW filters in both I.F. slots in my MP (original
model), and I added a 125 Hz CW filter to the 2.0 kHz slot in the 455 kHz
I.F. slot with no problems and the filter works fine there.

So, I would think that adding SSB filters to the CW slots should also be
no problem.

If you are referring to the MK V or Field model, it may be a pain to
select the desired filter combination because of the lack of front panel
filter selection buttons that the original MP has.

73, de Earl, K6SE