[1000mp] Drive From Packet Plug

[Thomas Giella KN4LF]

Bob,
  In the hamscope v1.54 software up in the browser tool bar under "Settings"
click on "TX Level Adjust" and make sure that the Wave/MP3 and Line-In are
not checked mute and then turn the sliders all the way up. I set my MIC gain
to 9:00 am.

73,
Thomas F. Giella
Retired Space & Atmospheric Weather Forecaster
Plant City, FL, USA

----- Original Message ----- 
From: "Bob Main" <bobmain1 at alltel.net>
To: <1000mp at mailman.qth.net>
Sent: Thursday, May 27, 2004 9:15 PM
Subject: Re: [1000mp] Drive From Packet Plug


> Done all that Tom, but I can't seem to get enough drive from the Packet
DIN
> jack to do CW or RTTY and barely enough for PSK.  The very strong signals
in
> the waterfall, S9 and higher, give me a blue line, that's it.  Weaker
> signals a barely there at all.  If I use the microphone next to the
speaker
> I get green/yellow lines indicating strong signals.
>
> ----- Original Message ----- 
> From: "Thomas Giella KN4LF" <kn4lf at tampabay.rr.com>
> To: "a 1000MP QTH E-List" <1000mp at mailman.qth.net>
> Sent: Thursday, May 27, 2004 9:09 PM
> Subject: [1000mp] Drive From Packet Plug
>
>
> > Bob,
> >
> > The following information will allow you to use the "Packet" DIN jack on
> the
> > back of the rig for "AF" PSK, MFSK16 and RTTY. BTW I use
> > Hamscope v1.54 too.
> >
> > As far as wiring to the "Packet" jack on back:
> >
> > 1.) Transceiver audio out to soundcard in is via pin #4 (Data Out).
> >
> > 2.) Transmit audio in from soundcard to pin #1 (Data In).
> >
> > 3.) If you want to use PTT actuation from your computer to transceiver
> then
> > it's pin #3 (PTT). You could also skip the T/R switch and use VOX but I
> > don't like to do that because the VOX settings for phone and digital are
> > different.
> >
> > As far as setting the transceiver up for use of the Packet DIN jack on
> back
> > and the PKT mode button on front:
> >
> > #1.) Push fast button and hold then the ENT button.
> > #2.) Select menu item 8-6.
> > #3.) Using the sub VFO tuning knob go to Easy Set.
> > #4.) Using the main VFO knob select PS31-u.
> > #5.) Hit ENT button.
> > #6.) Press PKT button once and the green LED on the LSB button lights
up.
> > #7.) Press the PKT button a second time and hold for 1 second, you hear
a
> > beep and Voila you are in USB mode
> > even though the LSB LED remains lit.
> >
> > You can check that you are indeed in USB by going to 20 meters and
tuning
> in
> > a phone signal.
> >
> > 73,
> > Thomas F. Giella
> > Retired Space & Atmospheric Weather Forecaster
> > Plant City, FL, USA
> > Grid Square EL87WX
> > Lat & Long 27 58 31 44N 82 09 51 98W
> >
> > NWS Tampa Bay, FL SKYWARN Observer # HIL-249
> > Citizens Weather Observation Program #CW2111
> > SWFWMD Rainfall Network Observer #574 Thackery
> > Weather Matrix Member Since 1999
> > PODXS 070 Club Member #349
> >
> > FL Space & Atmospheric Weather Institute http://www.kn4lf.com/fsawi.htm
> > Solar Space Weather & Geomagnetic Data Archive
> > http://www.kn4lf.com/kn4lf5.htm
> > HF/MF Radio Propagation Theory Notes http://www.kn4lf.com/kn4lf8.htm
> > 160-10 Meter Amateur Radio Resources http://www.kn4lf.com
> >
> >
> >
> >
> > ---
> > Outgoing mail is certified virus free by Grisoft AVG 6.0.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.691 / Virus Database: 452 - Release Date: 5/26/2004
> >
> > _______________________________________________
> > 1000mp mailing list
> > 1000mp at mailman.qth.net
> > http://mailman.qth.net/mailman/listinfo/1000mp
> >
>
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp


---
Outgoing mail is certified virus free by Grisoft AVG 6.0.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.691 / Virus Database: 452 - Release Date: 5/26/2004