[1000mp] 1000MP Mark V Field & PSK31/MFSK31/RTTY Via Soundcard

[Ronald Walters]

Tom,

If the MV is like the original Ft1000MP the data in only functions when the rig is in the packet mode via the front panel, it automatically mutes the microphone and uses the packet input visa the data jack.  Try the packet mode and see if that helps.  Also when I first received the FT1000MP there was an addendum attached to the manual that changed some of the pin ID's.  I'm sure yours is up to date.  Good luck  PS - Check the manual and see if you're MV is the same with respects to the data in.

Ron W4LDE

  ----- Original Message ----- 
  From: Thomas Giella KN4LF 
  To: a 1000MP QTH E-List ; a FT-1000MP eGroup 
  Sent: Thursday, May 13, 2004 22:58
  Subject: [1000mp] 1000MP Mark V Field & PSK31/MFSK31/RTTY Via Soundcard


  I bought a new FT-1000MP Mark V Field last weekend and am just getting around to interfacing it via my homebrewed digital interface and homebrewed computer. For DSP software I use Hamscope v1.54 because it supports PSK31, MFSK16 and RTTY.

  Using the supplied five pin packet male plug I soldered transceiver audio out to soundcard in at pin #4 (data out) and that works fine. I also soldered the PTT line from the computer to pin #3 and that keys the rig up fine. The problem is with soundcard audio out to transceiver audio in. I soldered that to pin #1 (data in) and I get no or low audio in, even with the soundcard controls turned up to an acceptable level. So I presume that this is the wrong place for audio in to the 
  transceiver. As far as I can see I either send audio in via the mic jack on the front of the rig which is unacceptable to me because of wear and tear on the male jack. Or I use RCA female "Patch" jack on the back of the rig, which is also unacceptable to me because it's tied to the mic jack on front and I would still have to unhook the MD-100 desk mic to prevent audio pick up.

  Am I missing something? Also as far as menu settings, I went to 8-6 and set it up by selecting Easy-Set with the sub VFO knob and PS31-SU with the main VFO knob. I also tried PS31-U. 

  Any help would be appreciated.

  73 & GUD DX,
  Thomas F. Giella, KN4LF
  Retired Space & Atmospheric Weather Forecaster
  Plant City, FL, USA
  Grid Square EL87WX
  QSL Via Direct Snail Mail, ARRL LOTW & eQSL

  NWS SKYWARN Observer # HIL-249
  SWFWMD Rainfall Observer #574
  PODX 070 PSK31 Club Member #349

  KN4LF Daily Solar Space Weather & Geomagnetic Data Archive http://www.kn4lf.com/kn4lf5.htm
  KN4LF HF/MF Radio Propagation Theory Notes http://www.kn4lf.com/kn4lf8.htm
  KN4LF 160-10 Meter Amateur Radio Resources & More http://www.kn4lf.com
  Florida Space & Atmospheric Weather Institute http://www.kn4lf.com/fsawi.htm




  ---
  Outgoing mail is certified virus free by Grisoft AVG 6.0.
  Checked by AVG anti-virus system (http://www.grisoft.com).
  Version: 6.0.684 / Virus Database: 446 - Release Date: 5/13/2004


------------------------------------------------------------------------------


  _______________________________________________
  1000mp mailing list
  1000mp at mailman.qth.net
  http://mailman.qth.net/mailman/listinfo/1000mp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/1000mp/attachments/20040514/3ab8f479/attachment-0001.htm