[1000mp] Using both 500 and 250Hz MkV filters in RTTY mode

[Stu]

Hi Jim

Just checked again and your correct its only in cw mode its set up how I thought it was in Packet mode I must
have checked it wrong the last time I did it or assumed when set up in cw it was the same for packet mode

When I checked the nar1 in pkt mode its set up to use 2.0 filters and not the 500hz filter and nar 2 is set as
250hz
So looks like its a waste of a nar1 button on pkt mode

Sorry to get your hopes up on that one will have a play later see if I can find away to get the nar 1 to 500hz
but I think it will be a waste of time

Stu MM0BSM
----- Original Message ----- 
From: "Jim Smith" <jimsmith@shaw.ca>
To: <1000mp@mailman.qth.net>
Sent: Thursday, February 19, 2004 8:15 PM
Subject: Re: [1000mp] Using both 500 and 250Hz MkV filters in RTTY mode


> Hi Stu,
>
> I have found no way of setting both Nar1 and Nar2 filters in RTTY/FSK or
> PKT/AFSK modes.  Nar1 and Nar2 do work FB in CW mode.
>
> I find the manual discussion of menu 5-4 and data mode (whatever that
> is) to be well nigh incomprehensible.  Maybe I'm missing something.  If
> so, I would be delighted, as would several others, if you could tell me
> how you set your rig up to accomplish the desired result.
>
> At present I have Inrad 8.2 MHz 500 and 250 Hz filters installed.  In
> addition, I'm about to install a 455 kHz 500 Hz mech filter.
>
> 73 de Jim Smith   VE7FO
>
>
>
> Stu wrote:
>
> >Isn't it a matter of setting the filters up in the menu to be nar 1 500hz and nar 2 250hz I have mine set
that
> >way
> >I have a 500hz at the second if and have a 250hz at third if in my radio at present
> >menu 5.4 I have it set at 455
> >
> >when I checked it with k6se software it was set how I wanted it
> >
> >Stu MM0BSM
> >
> >
> >
> >
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> 1000mp@mailman.qth.net
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>