[1000mp] How can I use my CW filters on RTTY?

[Pawel SP7PS]

Hello Jim,
in FT-1000MP (not Mark V) you have to set the center frequency of PKT for CW
filters. Go to menu 6-4 (PAc-FdSP) and set to -2.210. Next go to menu 6-5
and set to 2210. After that your CW filters should work right in PKT using
AFSK as RTTY.

73's
Pawel, SP7PS
http://sp7ps.pl
http://shop.sp7ps.pl


"Jim Smith" wrote: Subject: [1000mp] How can I use my CW filters on RTTY?

> Just finished WPX RTTY.  Learned a lot.  One of the things I learned
> is  that when using AFSK with the Pkt input jack on the MkV the CW
> filters  aren't available which made for a pretty miserable time.  I
> don't know  why I'm using AFSK as opposed to FSK.  I think it was
> easier to do (no  interface required) when I was first getting
> started with RTTY and have  seen no reason to change.
>
> So, what do I have to do in order to be able to have the Nor, Nar1
> and  Nar2 buttons select the same filters in RTTY/Pkt as they do when
> in CW mode?
>
> It just occurred to me that K6SE's MPFilters might work for this.
> Has  anybody tried it to select CW filters when using RTTY/Pkt?  I
> see the  possibility of a conflict with WL using the same comm port.
>
> I was going to search the list archives for info on this.  I thought
> I  knew how but I don't see any means of doing it.  Is it no longer
> possible to search them?  If so, that would be a real loss.
>
> Another thing I learned is that selecting the APF DATA EDSP filter
> can  put you in the position of seeing a 40 over signal from W5 on
> the S  meter but not hearing it when tuned several hundred Hz away
> with the Nor  or Nar1 filter selected.  Really irritating until I
> figured out what was  happening.  After that it was just irritating.
>
> 73 de Jim Smith   VE7FO
>
>
>
>
>
> _____________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> 1000mp@mailman.qth.net
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp