[1000mp] FSK interface using opto-isolators
Pete Smith
n4zr at contesting.com
Fri Dec 3 08:12:49 EST 2004
Yup.
73, Pete
At 07:59 AM 12/3/2004, you wrote:
>Hi Pete,
>
>I assume you do know that for semi-breakin VOX must be on, right?
>
>73,
>Art
>W2NRA
>
>----- Original Message ----- From: "Pete Smith" <n4zr at contesting.com>
>To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
>Sent: Friday, December 03, 2004 12:17
>Subject: Re: [1000mp] FSK interface using opto-isolators
>
>
>>I tried an optoisolator interface for CW with my Mark 5, and found that
>>the CW opto did not pull the key line low enough to trigger the
>>semi-break-in -- I got CW sidetone but no actual RF. No doubt this could
>>have been solved by someone who knew what they were doing. But there
>>definitely is enough current to drive an ordinary optoisolator, at least
>>in a desktop port, judging by my experience.
>>
>>73, Pete
>>
>>PS -- I have never had any problem with ground loops involving the serial
>>or parallel port on my computer and my Mark 5, except for the sound card
>>to microphone connection. An isolation transformer solved the problem
>>there. And before anyone writes to ask why I didn't use a back panel
>>audio input, I use the connection for stored voice messages in phone
>>contests, and wanted to be able to route the audio through my SO2R box,
>>along with PTT.
>>
>> At 06:30 PM 12/2/2004, you wrote:
>>
>>
>>
>>>
>>> Hi Group,
>>>
>>>Is it possible to use opto-isolators to generate both the Shift and PTT
>>>using the computer serial Com port? If so, what would the value be for
>>>the resistor be to operate the LED? More important, does the serial port
>>>have enough current to drive an opto-isolator? I plan to operate RTTY
>>>using FT1000 Mk5 Field and opto-isolators would completely eliminate any
>>>ground loops.
>>>
>>> Thank you,
>>>John V.
>>>
>>>
>>>
>>>
>>>_______________________________________________
>>>1000mp mailing list
>>>1000mp at mailman.qth.net
>>>http://mailman.qth.net/mailman/listinfo/1000mp
>>
>>_______________________________________________
>>1000mp mailing list
>>1000mp at mailman.qth.net
>>http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>_______________________________________________
>1000mp mailing list
>1000mp at mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/1000mp
More information about the 1000mp
mailing list