[1000mp] Fw: Shuttle-jog position?

Fri, 21 Nov 2003 04:41:51 -0600

Not using the Voice Keyer. Will check the mike cable.

Dwight w9yq
  ----- Original Message -----=20
  From: Bill, KE5OG=20
  To: [email protected] ; [email protected]=20
  Sent: Thursday, November 20, 2003 9:12 PM
  Subject: Re: [1000mp] Fw: Shuttle-jog position?

  I just went through this. Are you by any chance using an MFJ-434 Voice
  Keyer? If so that is what is causing the problem.  If not, I would be
  looking at the mike cable.

  If you are using the MFJ434 you need to change the jumpers to the =
alternate
  Yaesu position in the manual. If that's the case and you don't have =
the
  info, let me know and I can send it to you.

  73,
  Bill

  ----- Original Message -----=20
  From: "DGB" <[email protected]>
  To: <[email protected]>
  Sent: Thursday, November 20, 2003 5:45 PM
  Subject: [1000mp] Fw: Shuttle-jog position?

  I recently purchased a FT-1000 MP Field from HRO in Atlanta and =
exchanged
  the rig because the shuttle jog ring switch would not detent back to =
the
  home position. HRO sent me a second rig and it has the same problem. =
Both
  rigs were new out of the box. The problem occurs when the ring switch =
is
  rotated CCW and the switch does not return back to it's centered =
position.
  The frequency keeps shifting down. The problem is intermittent and is =
most
  noticeable when operating CW, AM or RTTY. The cause appears to be the
  improper position of the encoder switch. With the jog ring sitting in =
the
  centered position the switch is off center to the right and starts =
tuning
  down in frequency.

  If anyone has heard of this problem before and has any suggestions for =
a
  solution I'd appreciate an email.

  73
  de ns9r
  [email protected]

  --- StripMime Report -- processed MIME parts ---
  multipart/alternative
    text/plain (text body -- kept)
    text/html
  The reason this message is shown is because the post was in HTML
  or had an attachment.  Attachments are not allowed.  To learn how
  to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
  _______________________________________________
  List Moderator: Richard Lubash N1VXW
  1000mp mailing list
  [email protected]
  To Change Options or Unsubscribe:
  http://mailman.qth.net/mailman/listinfo/1000mp

--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---